p8z68-v pro/gen3 board doesn't recognize meomory or video

[freewaytd]

My p8z68-v pro/gen3 won't provide any video display at all. The memory LED lights up and there is no posting sound. When I remove all memory it does post with the code for "no memory". The ASUS site says I need to manually adjust the memory timings and voltage "for a test". Memory is 16 gb of Kingston HyperX ddr1600. CanI do this with no video? How do I do it? No other component lights are on. Thanks, Ted

 

[sonexpc]

I think you have 4x 4GB HyperX memory. Try to put it one by one and restart the PC everytime... May be just one of those have problem...

More detail on Memory test can read here http://www.sonexpc.com/support/how/1/0002

 

[freewaytd]

Thanks for the reply.
I have tried to get it to recognize 1, 2, 3, or 4 modules. Maybe even more basic is no video display.
If I don't have any modules in I get the one long and two short beeping (and no display)

 

[sonexpc]

DO you use onboard Video or seperate Video Card... if you use seperate Video try take it out and just boot up with on board first

 

[freewaytd]

DO you use onboard Video or seperate Video Card... if you use seperate Video try take it out and just boot up with on board first

So far I am using the onboard video. I did try a separate video card with the same result.

 

[freewaytd]

Resolved. Damaged motherboard.