Sign in with
Sign up | Sign in
Your question

P67 extreme4 gen 3 problem

Last response: in Motherboards
Share
March 2, 2012 6:16:25 PM

I have a gigabyte 560 ti installed as the video card. I just finished building my pc. Now when it was just the motherboard and the processor I started the motherboard and the dr. debug lit up normaly and I figured everything was good to go. So I installed the rest of the build and turned on the computer the all the fans work but I get no video and the Dr. debug isnt showing anything. What could my problem be? Im totally lost
March 2, 2012 6:27:53 PM

Check the memory. Are you using all the DIMM slots?
m
0
l
March 2, 2012 6:35:03 PM

Suave145 said:
Check the memory. Are you using all the DIMM slots?

im using a1 and b1. I already tried booting 1 stick at a time also.
m
0
l
Related resources
March 2, 2012 6:37:01 PM

shouldnt the dr. debug be lit up atleast? even if there was nothing wrong? Thats why im worried.
m
0
l
March 2, 2012 9:53:49 PM

Suave145 said:
Check the memory. Are you using all the DIMM slots?

I'm returning the motherboard and CPU. I think the CPU is fine but since amazon will send a new one I'm not taking a chance.
m
0
l
March 3, 2012 2:25:38 PM

and the memory you are also using is compatible that you are sure of?
m
0
l
March 9, 2012 11:27:50 PM

Suave145 said:
and the memory you are also using is compatible that you are sure of?

I just received the replacement board and everything is working perfectly. Must of been a faulty board.
m
0
l
March 12, 2012 4:15:57 PM

Do you still have the board? If you, test the voltages if you can or load a single dimm onto the board just to be sure of that possibility its dead
m
0
l
!