First build and i'm trying to figure something out

[orgufiel]

I ordered all my parts and pretty much everything is connected and running. The problem is that I have the HAF 932 advanced case and it comes with the USB 3 ports and cable. I also have the Asus p8h67 m pro but i cant seem to figure out where to connect the cable on the mobo or if its even an option. If theres some kind of converter or something so I can actually connect the cable it would be great because I dont want to have the 2 USB 3 ports just for show. Also, the case came with a 1394 cable which looks like it should belongwhere i connected the other usb's but I wasn't sure so I left it disconnected.

Here are the two parts:
http://www.newegg.com/Product/Product.aspx?Item=N82E16811119160

http://www.newegg.com/Product/Product.aspx?Item=N82E16813131711&cm_re=asus_m_pro-_-13-131-711-_-Product

 

[sadams04]

Page 1.5.3 - Motherboard Layout and 1.5.4 - Layout Contents

#16 is the 1394a connector
#15 are the USB connections, but they are USB 2.0 only. The USB 3.0 connections on that board are only the Blue ones on the back panel.

MB Manual @ http://files.pugetsystems.com/1869/parts/Motherboard/Asus-P8P67-M-Pro-7439/E6256_P8P67_M_PRO.pdf

 

[orgufiel]

Thats for the p8p67 pro but I have the p8h67 pro with a slightly different lay out. I know the board itself comes with the usb 3 on the back but the case brought 2 usb 3 on the front panel. The cable is in the case but i'm just not sure where to connect it (if anywhere).

 

[banthracis]

Check out your mobo manual. It'll be in there, probably in the equivalent sections to what sadams listed for ya.