Cant boot ssd corsair force 3 on p8z68 deluxe after upgrading bios from 3101 to

i upgraded my Asus P8Z68 Deluxe Gen 3 Bios from 3101 to 3202.. now after i did the whole upgrade went well no errors happen. until i notice that it kept doing a Boot loop on the Bios...
i looked around and didnt see anything change. (yes its not overclock, its standerd atm) any ideas...???
4 answers Last reply
More about cant boot corsair force p8z68 deluxe upgrading bios 3101
  1. Check and make sure your SATA ports are set to AHCI and not IDE. The BIOS update probably made the board default to IDE.
  2. The AHCI is on..not IDE, i even Upgraded the Firmware on the SSD to 1.3.3 and still nothing. i can access the drive if i use another HDD, that how i manage to upgrade the firm on the force 3.
  3. You can get into BIOS I guess?

    Try another SATA port.

    Try resetting CMOS. Either with the jumper on the board or by removing the battery for 10 minutes.
  4. I have tryed taking the battery out for a day. even use the Cmos button. i got an old 40g HDD installed windows. i can see the SSD in windows is there i can access the drive take things out, even run a game..
Ask a new question

Read More

Asus BIOS Boot Corsair Force Motherboards