750w PSU enough for Sandy Bridge?

UnitedExpress4180

Distinguished
Jul 19, 2010
88
0
18,640
I'm working on building a Sandy Bridge PC. I plan to use:

-i5 2500k
-MSI P67S-C43 (B3)
-4 GB RAM (not sure what brand yet, for now I'm going to use the existing 4GB RAM out of my HP system)
-1 DVD burner
-1 WD Caviar Blue, 640 GB, 7200 RPM
-1 ATI HD5770 (eventually will be upgraded to GTX 560)
-Cooler Master Hyper 212 Plus
-4 120mm case fans

My question is whether I need a 750 watt power supply for this build (I am looking at a Corsair TX750), or if I can get by with less/need more. Any thoughts?
 
For a system with a single GeForce GTX 560 graphics card NVIDIA recommends a power supply with a minimum of a 450 Watts or greater with a +12 Volt continuous current rating of 24 Amps or greater and with at least two 6-pin PCI Express supplementary power connectors.

The power supply's +12 Volt continuous current rating specification is what you should be worried about not the wattage.
 

browsingtheworld

Distinguished
Jun 28, 2011
612
0
19,010
Overclocking adds what? 5-10W, maybe?

The 400W PSU will be fine:
35196.png

This is with a 130W i7.
 
An Intel Core i5-2500K will draw 6 Amps more from the +12 Volt rail when overclocked to 4.9 GHz running at 100% CPU load than when running at its stock clock speed of 3.3 GHz.

The Corsair CMPSU-650TXV2 would give you plenty of headroom for overclocking both the CPU and the GPU.
 

leandrodafontoura

Distinguished
Sep 26, 2006
898
0
19,060
Friend, no more than 750@ is required, but get at least 650W. You want get double of waht you really need, so you are not stressing continuously the PSU, wich would result in a short lifetime, more heat, and more noise from tha fan.

In addition, you may want to have room for upgrades, like adding watercooling, more HDDs, a 2nd videocard... Think carefully, as the price diference is very low, and its a piece of hardware thas gonna stick around the next 10 years without the need of replacement.