Vdroop Pencil Mod

[raddybt]

Okay I have a terrible.. and I mean terrible Vdroop - I've set CPU Voltage at 1.5125v in BIOS and it is 1.5 Vcore at idle.. but when i load the CPU to the max the Vcore is doing down to 1.38-1.46-8 .... This is SOOO stoping my CPU overclock!
Spec:

Motherboard - ASRock 880GMH/U3S3 - http://www.asrock.com/mb/overview.asp?Model=880GMH/U3S3
Processor - AMD FX 4100 3.6ghz 12M
RAM - ADATA 4GB 1333mhz
Video Card - GeForce GTX 550Ti Sonic 1024M
PSU - Seasonic 630W

I REALLY NEED your help with that Pencil Mod.. I don't now where to find these ressistors I need to .. paint on my Motherboard! PLEASE If anyone can help me I'd really appreciate it!

 

[raddybt]

Come on... can anyone help?

 

[nforce4max]

I am looking into this my self and a few years ago there was a lot of people doing pencil mods for boards with this issue. I would be very happy just to have a consistent voltage without any spikes and dips :c

Near the vrm controller there could be a resistor that could be pencil modded but I don't have this board nor do I have enough experience about it's design.