Rotate Cloned display

[Zakary]

Hi everyone!

On my Win7 computer, I've 2 screen, an Acer T230H and a Sharp Aquos 32' LCD.

For a specific reason the Acter T230H display is rotated using the ATI Rotate feature.
Now a would like to duplicate the display of this 1st screen to my Sharp LCD. But because of the rotation form the primary display the second display is also Up Side down, what I don't wish.

In short term, I wish to have 2 display in clone mode, and have one of them rotated.

Do someone here know a solution for this, a mean software of hardware solution?
I've try IRotate without sucess

Many thank

My actual setup is;
Quad Code system
Windows 7 Home
Integrated ATI 3200 HD
VGA Output for the ACER T230H
HDMI Output for the Sharp Aquos 32'

 

[mactronix]

Is this what you are looking for ?

http://www.labnol.org/software/rotate-monitor-in-windows-7/8972/


Mactronix

 

[Zakary]

Hi!
Thanks for your reply,
But no this is not what I'm looking for
This article show how to to flip a screen in a Extended Desktop.

In my case the Desktop is not Extended but Cloned, both screen have the same display.
And my problem is that one of the two screen them must rotated, and not both screen.

Hugo

 

[mactronix]

Yes I understood that but didnt know if it was possible to switch the second screen to portrate mode anyway. It seems to me that its the same differance.
It may be that you cant do it because you need a dedicated GPU to enable the function.

Hopefully if you cant do it then someone will come along who knows for sure.

Mactronix

 

[Zakary]

I do not actually have two video card near by to try it, but do you know if it can be done with 2 different video card?

 

[Zakary]

Maybe sort sort of VGA Hub have this feature?

 

[Zakary]

Is there someone around that have once try this device? And could give me feed back?

http://us.startech.com/product/USB2VGAPRO-Professional-USB-VGA-External-Dual-or-Multi-Monitor-Video-Adapter


The rest of the story

http://www.tomshardware.com/forum/forum2.php?config=tomshardwareus.inc&cat=33&post=310859&page=1&p=1&sondage=0&owntopic=1&trash=0&trash_post=0&print=0&numreponse=0&quote_only=0&new=0&nojs=0