Sign in with
Sign up | Sign in
Your question

MoBo Replacement for HP p6210f desktop

Tags:
  • Chipsets
  • Motherboards
Last response: in Motherboards
Share
April 6, 2012 2:57:01 PM

Board is fried. Looking for advice on whether a replacement board is possible and will fit in existing case. I'm not sure how to compare board sizes... here are detailsl of existing board. Any help is appreciated.
Manufacturer: Pegatron
Form factor: microATX - 24.4 cm (9.6 inches) x 24.4 cm (9.6 inches)
Chipset: NVIDIA GeForce 9100
Memory sockets: 4 x DDR2
Front side bus speeds: 5200MT/s (5.2 GT/s)
Processor socket: AM2+
Expansion Slots:
1 PCI Express x16 slot for graphics card
3 PCI Express x1 slots
Processor
AMD Athlon II X4 620
Operating speed: Up to 2.6 GHz
Number of cores: 4
Socket: AM3
Bus speed: 4000 MHz HT3
Processor upgrade information
Socket type: AM3
TDP:
Motherboard supports the following processor upgrades:
AMD Athlon X2 (Bt)
AMD Athlon 64 X2 up to 6000+ (W)
AMD Phenom Triple-Core up to 8xxx (AM2+) (Toliman)
AMD Phenom Quad-Core 9xxx series (AM2+) up to 9850 (Agena)

Bob O.

More about : mobo replacement p6210f desktop

a c 435 V Motherboard
April 7, 2012 7:32:55 AM

For an original hp windows installation, check ebay; here's one example: http://www.ebay.com/itm/HP-Desktop-Motherboard-MSI-AMD-.... I would also look for used hp systems similar to yours on craigslist. You should be able to find one for around $100; if the board has a similar chipset, you may be able to install your old hardrive with files you want to save. If you have a non hp windows dvd, then here's a non hp board that should fit in your case: http://www.amazon.com/ASRock-GeForce-Motherboard-N68C-S....
m
0
l
June 29, 2012 2:56:34 PM

s51flyer said:
Board is fried. Looking for advice on whether a replacement board is possible and will fit in existing case. I'm not sure how to compare board sizes... here are detailsl of existing board. Any help is appreciated.
Manufacturer: Pegatron
Form factor: microATX - 24.4 cm (9.6 inches) x 24.4 cm (9.6 inches)
Chipset: NVIDIA GeForce 9100
Memory sockets: 4 x DDR2
Front side bus speeds: 5200MT/s (5.2 GT/s)
Processor socket: AM2+
Expansion Slots:
1 PCI Express x16 slot for graphics card
3 PCI Express x1 slots
Processor
AMD Athlon II X4 620
Operating speed: Up to 2.6 GHz
Number of cores: 4
Socket: AM3
Bus speed: 4000 MHz HT3
Processor upgrade information
Socket type: AM3
TDP:
Motherboard supports the following processor upgrades:
AMD Athlon X2 (Bt)
AMD Athlon 64 X2 up to 6000+ (W)
AMD Phenom Triple-Core up to 8xxx (AM2+) (Toliman)
AMD Phenom Quad-Core 9xxx series (AM2+) up to 9850 (Agena)

Bob O.

helllo,
I have a friend that has the HP model p6210f and his motherboard has been looked at by HP service tEchs and determined to need to be replaced. Did the motherboard suggestion ASRock Socket AM2+/ GeForce 7025/ DDR3&DDR2/ A&V&L/ MATX Motherboard N68C-S UCC given to you on this post work in your same desktop model? Thanks for the reply. Matt633way
m
0
l
!