Sign in with
Sign up | Sign in
Your question
Closed

New build need help QUICK

Last response: in Components
Share
July 24, 2011 6:33:07 PM

have asrock 770de motherboard
gtx 460 pny
gskill 2x2gb 10666 8-8-8-21 ddr3 1333
amd 965 be quad core cpu
antec earthwatt 500 watt psu

cant get to run stable freezes blue screen bsod window 7 32bit os did not do clean install of os didnt want loose pitures or ole lady will kill me lol or to reinstall game s and programs but it does run please help

More about : build quick

July 24, 2011 6:36:59 PM

make sure your memory has been set to the correct speed and voltage in the bios
Score
0
July 24, 2011 6:43:34 PM

dklhutto said:
have asrock 770de motherboard
gtx 460 pny
gskill 2x2gb 10666 8-8-8-21 ddr3 1333
amd 965 be quad core cpu
antec earthwatt 500 watt psu

cant get to run stable freezes blue screen bsod window 7 32bit os did not do clean install of os didnt want loose pitures or ole lady will kill me lol or to reinstall game s and programs but it does run please help


http://phyxion.net/Driver-Sweeper/Driver-Sweeper/Versio...

enter safe mode and use driver sweeper and wipe all the previous boards drivers and re-install the new boards drivers... this is assuming you can get into windows... if not you'll have to re-install windows. Don't worry, windows will automatically see that there's an existing windows OS and will save everything to the C:Windows old folder... will have to re-dowload/install games and programs but atleast you'll have your pics and such. REMEMBER it is ALWAYS a good idea to do a back up ANYTIME you do a hardware change... IMPERATIVE.

PS - what Asrock 770de is it??

A770DE+

M3A770DE

??
Score
0
Related resources
July 24, 2011 6:59:50 PM

it is the M3A770DE

and i have done the driver sweep
Score
0
July 24, 2011 7:02:25 PM

and i have finnally got all the timing and voltage set was a trick doing it but cpu-z shows the right settings now need to test and with what do i need to test this rig?
Score
0
July 24, 2011 7:03:00 PM

What error are you getting?
Score
0
July 24, 2011 7:14:49 PM

test it by doing what you normally do on your pc--or to test it really hard try running prime 95

Score
0
July 24, 2011 7:16:01 PM

i was geting nividia windows kerrnal mode driver thing but havnt seeen that latelysince i did the driver sweep and clean install of nividia drivers now im getting pc lock and have to reset i need away to test what i did with timing to see if that was the proble and another question is my psu under powered
Score
0
July 24, 2011 7:17:52 PM

im think i will try prime 95 is there a quick test to it ?
Score
0
July 24, 2011 7:18:34 PM

what is the voltage set to for your ram? my bios always sets 1.5v by default when my ram needs 1.65v to run at 1600mhz
Score
0
July 24, 2011 7:20:16 PM

you can stop the prime 95 test any time you want--theres no actual time--ie it doesnt run 10 minutes then stop itself
Score
0
July 24, 2011 7:23:12 PM

mcnumpty23 said:
what is the voltage set to for your ram? my bios always sets 1.5v by default when my ram needs 1.65v to run at 1600mhz

mine is set to 1.5v and that is what the ram needs and what gskills recommends as std
Score
0
July 24, 2011 7:27:25 PM

if thats the manufacturers recommended voltage for the speed you are running the ram at thats ok--you can always run memtest to check the ram a couple of passes normally is enough--errors usually show really quickly

if you have important photos on there you really should get a flash drive and back them up they are so cheap now cos sooner or later you will end up losing them :( 
Score
0
July 24, 2011 7:30:33 PM

dklhutto said:
i was geting nividia windows kerrnal mode driver thing but havnt seeen that latelysince i did the driver sweep and clean install of nividia drivers now im getting pc lock and have to reset i need away to test what i did with timing to see if that was the proble and another question is my psu under powered


Could be your video cards drivers... uninstall the video drivers and re-install the gtx drivers (use driver sweeper). If your timings are 8-8-8-21 @ 1.5v you're good there. Bad drivers for the video card will lock the comp. up so try that.

let us know what happens.

The power supply is fine, a little wimpy but nonetheless alright...
Score
0
July 24, 2011 7:33:43 PM

RussK1 said:
Could be your video cards drivers... uninstall the video drivers and re-install the gtx drivers (use driver sweeper). If your timings are 8-8-8-21 @ 1.5v you're good there. Bad drivers for the video card will lock the comp. up so try that.

let us know what happens.


he already said he did the video driver and driver sweep bit earlier
Score
0
July 24, 2011 7:50:32 PM

uninstall and re-install the video drivers... and DON'T run prime95... it's asinine to run it when your comp is already locking up. Find what's causing the lock ups and fix it then run what ever stress programs you want.

Go to the start menu and type in "windows memory diagnostic", select it and reboot.
Score
0
July 24, 2011 8:00:03 PM

last blue screen
memory_management
0x000008e (0x0000411 , 0xc046ab00 , 0x00315AFC , 0xc000003
then reboot then this
0x000008e {0xc0000005, 0x90e73888 , 0xa51bba40 , 0x00000000
afd.sys
Score
0
July 24, 2011 8:04:58 PM

dklhutto said:
last blue screen
memory_management
0x000008e (0x0000411 , 0xc046ab00 , 0x00315AFC , 0xc000003
then reboot then this
0x000008e {0xc0000005, 0x90e73888 , 0xa51bba40 , 0x00000000
afd.sys


Take out the memory and run windows memory diagnostic with one stick at a time. It won't take that long being you only have two sticks. You might have gotten defective memory. The standard for that board is 1600mhz memory, but I don't think it would be a prob running slower memory.
Score
0
July 24, 2011 8:18:28 PM

...also note run the memory in different slots, while it is very possible that you have a bad stick you could have a bad socket.
Score
0
July 24, 2011 8:25:30 PM

RussK1 said:
...also note rum the memory in different slots, while it is very possible that you have a bad stick you could have a bad socket.

well ran memory diagnostic came back cleanwith both sticks in it and asrock motherboard has 4 slot it is recommended to in stall 1600 ram in a2 and b2 slots and have check compatibility ram for this board and is supported for what i have and they are installed in a1 and b2 slots


and this post have new bsod
0x0000008e
0x80000004
0x85960002
0x8e152c1f
0x00000000
Score
0
July 24, 2011 8:37:04 PM

dklhutto said:
well ran memory diagnostic came back cleanwith both sticks in it and asrock motherboard has 4 slot it is recommended to in stall 1600 ram in a2 and b2 slots and have check compatibility ram for this board and is supported for what i have and they are installed in a1 and b2 slots


and this post have new bsod
0x0000008e
0x80000004
0x85960002
0x8e152c1f
0x00000000


run chkdsk and select attempt recovery of bad sectors - reboot. Also what AV are you running?
Score
0
July 24, 2011 8:45:54 PM

RussK1 said:
run chkdsk and select attempt recovery of bad sectors - reboot. Also what AV are you running?

microsoft essintial for av
Score
0
July 24, 2011 8:50:22 PM

dklhutto said:
microsoft essintial for av


Quoted this from Microsoft's website:

BCCode: 8E 0x0000008E is same as 0x1000008E

Cause
The KERNEL_MODE_EXCEPTION_NOT_HANDLED bug check is a very common bug check. To interpret it, you must identify which exception was generated.
Common exception codes include the following:
0x80000003: STATUS_BREAKPOINT indicates that a breakpoint or ASSERT was encountered when no kernel debugger was attached to the system.
Resolving the Problem
If you are not equipped to debug this problem, you should use some basic troubleshooting techniques:
Make sure you have enough disk space.
If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
Try changing video adapters.
Check with your hardware vendor for any BIOS updates.
Disable BIOS memory options such as caching or shadowing.
If you plan to debug this problem, you might find it difficult to obtain a stack trace. Parameter 2 (the exception address) should identify the driver or function that caused this problem.
If you do not know the specific cause of the exception, consider the following items:
Hardware incompatibility. Make sure that any new hardware installed is listed in the Microsoft Windows Marketplace Tested Products List.
Faulty device driver or system service. A faulty device driver or system service might be responsible for this error. Hardware issues, such as BIOS incompatibilities, memory conflicts, and IRQ conflicts can also generate this error.
If the bug check message lists a driver by name , disable or remove that driver. Also, disable or remove any drivers or services that were recently added. If the error occurs during the startup sequence and the system partition is formatted with NTFS file system, you might be able to use Safe Mode to rename or delete the faulty driver. If the driver is used as part of the system startup process in Safe Mode, you have to start the computer by using the Recovery Console to access the file.
If the problem is associated with Win32k.sys, the source of the error might be a third-party remote control program. If such software is installed, you can remove the service by starting the system by using the Recovery Console and then deleting the offending system service file.
Check the System Log in Event Viewer for additional error messages that might help identify the device or driver that is causing bug check 0x1E. You can disable memory caching of the BIOS to try to resolve the error. You should also run hardware diagnostics, especially the memory scanner, that the system manufacturer supplies. For more information about these procedures, see the owner's manual for your computer.
The error that generates this message can occur after the first restart during Windows Setup, or after Setup is finished. A possible cause of the error is lack of disk space for installation and system BIOS incompatibilities. For problems during Windows installation that are associated with lack of disk space, reduce the number of files on the target hard disk drive. Check for and delete any temporary files that you do not have to have, Internet cache files, application backup files, and .chk files that contain saved file fragments from disk scans. You can also use another hard disk drive with more free space for the installation.
You can resolve BIOS problems by upgrading the system BIOS version

BCCode: 8E 0x000008E 0x1000008E - read this link
http://www.faultwire.com/solutions-fatal_error/KERNEL-M...*1151.html?order=date
Score
0
July 24, 2011 9:04:35 PM

RussK1 said:
Quoted this from Microsoft's website:

BCCode: 8E 0x0000008E is same as 0x1000008E

Cause
The KERNEL_MODE_EXCEPTION_NOT_HANDLED bug check is a very common bug check. To interpret it, you must identify which exception was generated.
Common exception codes include the following:
0x80000003: STATUS_BREAKPOINT indicates that a breakpoint or ASSERT was encountered when no kernel debugger was attached to the system.
Resolving the Problem
If you are not equipped to debug this problem, you should use some basic troubleshooting techniques:
Make sure you have enough disk space.
If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
Try changing video adapters.
Check with your hardware vendor for any BIOS updates.
Disable BIOS memory options such as caching or shadowing.
If you plan to debug this problem, you might find it difficult to obtain a stack trace. Parameter 2 (the exception address) should identify the driver or function that caused this problem.
If you do not know the specific cause of the exception, consider the following items:
Hardware incompatibility. Make sure that any new hardware installed is listed in the Microsoft Windows Marketplace Tested Products List.
Faulty device driver or system service. A faulty device driver or system service might be responsible for this error. Hardware issues, such as BIOS incompatibilities, memory conflicts, and IRQ conflicts can also generate this error.
If the bug check message lists a driver by name , disable or remove that driver. Also, disable or remove any drivers or services that were recently added. If the error occurs during the startup sequence and the system partition is formatted with NTFS file system, you might be able to use Safe Mode to rename or delete the faulty driver. If the driver is used as part of the system startup process in Safe Mode, you have to start the computer by using the Recovery Console to access the file.
If the problem is associated with Win32k.sys, the source of the error might be a third-party remote control program. If such software is installed, you can remove the service by starting the system by using the Recovery Console and then deleting the offending system service file.
Check the System Log in Event Viewer for additional error messages that might help identify the device or driver that is causing bug check 0x1E. You can disable memory caching of the BIOS to try to resolve the error. You should also run hardware diagnostics, especially the memory scanner, that the system manufacturer supplies. For more information about these procedures, see the owner's manual for your computer.
The error that generates this message can occur after the first restart during Windows Setup, or after Setup is finished. A possible cause of the error is lack of disk space for installation and system BIOS incompatibilities. For problems during Windows installation that are associated with lack of disk space, reduce the number of files on the target hard disk drive. Check for and delete any temporary files that you do not have to have, Internet cache files, application backup files, and .chk files that contain saved file fragments from disk scans. You can also use another hard disk drive with more free space for the installation.
You can resolve BIOS problems by upgrading the system BIOS version

BCCode: 8E 0x000008E 0x1000008E - read this link
http://www.faultwire.com/solutions-fatal_error/KERNEL-M...*1151.html?order=date

now im totally lost what to do and what the prob is
Score
0
July 24, 2011 9:13:27 PM

dklhutto said:
now im totally lost what to do and what the prob is


Alright, you did not re-install windows when you changed out your hardware right? If not then I firmly believe that's where the problem lies... you need to get into safe mode and sweep ALL of the drivers and reboot. Once into windows you can install the driver disk that came with the board and install. Repeat the steps for video card. If the Problem persists, take out memory and run with one stick. If this doesn't work, switch video plugs. I'm 90% sure you have a driver problem... it sucks I know, but if you don't want to do a clean install you have no other choice.
Score
0
July 24, 2011 9:14:20 PM

look at the system manufacturer and system model why this there and not showing my board?


OS Name Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name DKLHUTTO-PC
System Manufacturer To Be Filled By O.E.M.
System Model To Be Filled By O.E.M.
System Type X86-based PC
Processor AMD Phenom(tm) II X4 965 Processor, 3400 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. P1.70, 9/7/2010
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name dklhutto-PC\dklhutto
Time Zone Central Daylight Time

Score
0
July 24, 2011 9:20:36 PM

switch video plugs what do you mean by that ?
Score
0
July 24, 2011 9:22:52 PM

and if i do this wont windows install its own drivers
Score
0
July 24, 2011 9:28:11 PM

dklhutto said:
and if i do this wont windows install its own drivers


yes it will but you can always update them.
Score
0
July 24, 2011 9:29:03 PM

dklhutto said:
switch video plugs what do you mean by that ?


your gtx 460 has two DVI ports right? Switch ports.
Score
0
July 24, 2011 9:35:24 PM

dklhutto said:
look at the system manufacturer and system model why this there and not showing my board?


OS Name Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name DKLHUTTO-PC
System Manufacturer To Be Filled By O.E.M.
System Model To Be Filled By O.E.M.
System Type X86-based PC
Processor AMD Phenom(tm) II X4 965 Processor, 3400 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. P1.70, 9/7/2010
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name dklhutto-PC\dklhutto
Time Zone Central Daylight Time


System info isn't going to show board manufacturer, only BIOS version and date. Weird that it's not showing memory...

do you have a repair install disk... or a windows install disk? you can repair from that and it won't do anything with your data. Although you should back up sentimental stuff.

Score
0
July 24, 2011 9:50:10 PM

RussK1 said:
your gtx 460 has two DVI ports right? Switch ports.

gtx 460 pny oc it has one dvi and hdmi and one other port but dont have adaptor for or cable to that one
Score
0
July 24, 2011 9:51:20 PM

RussK1 said:
System info isn't going to show board manufacturer, only BIOS version and date. Weird that it's not showing memory...

do you have a repair install disk... or a windows install disk? you can repair from that and it won't do anything with your data. Although you should back up sentimental stuff.

oh yeah cut off the ram part its there lol
Score
0
July 24, 2011 9:56:03 PM

ok going to try driver sweep on all drivers that show up in safe mode if that dont work goin for clean install which i think is best bet i do have the pics on another drive not installed on this as back up and operating sytem on there to and all i got for windows 7 is upgrade disk not bootable disc
Score
0
July 24, 2011 10:03:25 PM

dklhutto said:
ok going to try driver sweep on all drivers that show up in safe mode if that dont work goin for clean install which i think is best bet i do have the pics on another drive not installed on this as back up and operating sytem on there to and all i got for windows 7 is upgrade disk not bootable disc


That's your wisest choice, back up your data and re-install. The upgrade disk will work as I've used them before. And yes you can boot from the upgrade disk but either way, just do it.

Get back to me...
Score
0
July 24, 2011 11:03:51 PM

Back up your data--but so you know, Windows 7 installs don't delete your data, it moves it to a folder called Windows.Old on your root directory.

I'm surprised people haven't talked more about you having unstable bios settings. Have you reset your bios or changed all the settings to "slow"/default settings to make sure it's stable. There's a chance that Windows has nothing to do with it.
Score
0
July 24, 2011 11:14:07 PM

dalauder said:
Back up your data--but so you know, Windows 7 installs don't delete your data, it moves it to a folder called Windows.Old on your root directory.

I'm surprised people haven't talked more about you having unstable bios settings. Have you reset your bios or changed all the settings to "slow"/default settings to make sure it's stable. There's a chance that Windows has nothing to do with it.


His Bios are default, the only thing he checked was memory voltage and timings. And I believe it is windows... he swapped EVERYTHING (hardware wise) out and somehow he booted into windows. He probably has so many driver conflicts it's retarted. Atleast if he cleanly installs windows and still has issues it'll narrow it down to the memory.
...and you're right, windows will save everything to the Windows.old folder.


What's crazy is that people were telling him to run prime95 which is moronic to say the least. It's a stability test not a diagnostic one. We all knew it wasn't stable so what is prime95 going to show him??

Score
0
July 25, 2011 12:07:00 AM

RussK1 said:
His Bios are default, the only thing he checked was memory voltage and timings. And I believe it is windows... he swapped EVERYTHING (hardware wise) out and somehow he booted into windows. He probably has so many driver conflicts it's retarted. Atleast if he cleanly installs windows and still has issues it'll narrow it down to the memory.
...and you're right, windows will save everything to the Windows.old folder.


What's crazy is that people were telling him to run prime95 which is moronic to say the least. It's a stability test not a diagnostic one. We all knew it wasn't stable so what is prime95 going to show him??

I totally agree that Prime95 would be useless (currently). I'd still turn down the memory settings to run at 1066 w/ 1600 latencies and see if it crashes after that (actually, Prime95 memory test might be useful at that point). Although I would recommend running Memtest86+ from a flash stick to test the memory.

I read through the thread and only saw that he'd checked memory voltage and timings. I didn't know that he'd check all his S1, etc. states, as well as CPU voltage, bus speeds, & multipliers. Sometimes those settings make you say, "Now how'd it get set to that?" So it's worth checking at least if you're searching for what's causing crashes. Resetting your bios to defaults should be the first step. My friend's 2.2GHz CPU was running at 1.8GHz initially for some reason--so I'm not sure what accidental settings may be.

I agree that a Windows clean boot may help, since a corrupted installation may cause BSODs on its own. But it's worth the 5 minutes to check settings and make sure it's not the CPU or Northbridge (with a high fsb setting) as well as running a full Memtest86+ RAM test if he doesn't have stuff backed up.

But STEP 1 should always be: BACK UP DATA.

EDIT: Additionally, it can't hurt to try to isolate what's causing the BSOD. Try running LinX (watch temps on HWMonitor while running it and cancel if it gets too hot) and see if it hangs or crashes. If it does, it's probably your CPU.

Does it BSOD when you're playing games? 30 seconds after boot up? When you try to run Google Chrome? Does it ever tell you a driver crashed? We need a lot more diagnostic info relating to the situations of the crashes to tell you anything more than it MIGHT be a driver problem and reinstalling Windows MIGHT fix it.
Score
0
July 25, 2011 12:34:45 AM

Quote:
I'd still turn down the memory settings to run at 1066 w/ 1600 latencies and see if it crashes after that


I agree, If the windows install doesn't work to clear up the issue then I was going to suggest running the memory at slower speeds. If that cures the blue screens then it proves faulty ram. Just got to find out which stick, and I mentioned running with one stick at a time in order to narrow it down. Which should have been done from the beginning should any problems arise. Rule, build a system = run with bare essentials should there be a problem.

Trying to save him trouble with RMA procedures by cleanly installing windows (which should be done anyhow) and removing driver issues from the equation. If the problem keeps showing it's nasty little head then it's memory. He's getting the error memory_management 0x000008e so there's a reason for it. I went to the Microsoft site and there is even some documentation as to which causes this such as bad drivers, corrupt HDD, corrupt OS, etc etc. The main one was the video driver which I too mentioned.

Hopefully the install fixes the issue... the moral of the story is trouble shooting sucks. :fou: 
Score
0
July 25, 2011 10:07:07 AM

ok this what i have done
safe mode driver sweep
reistalled all drivers with disc and pny driver for the gtx 460
havnt seen bsod yet bios set at default ram timing at default 9-9-9-24 1.5v
ran furmark just to see what happens screen froze about 5min in had to reset and reboot ran a game live for speed all was fine shut down pc
wert back and turned it on looks like it boot up fine but nothing on screen like there was no video out put had to restart many times to get every thing to boot up then shut down and rebooted booted up fine restarted all went fine left it for about 30min tried to boot up no screen couldnt tell if it acually boote dup or not with out screen reset and booted a couple of thime to get it back and this is where i am at work now cant mess with it now to see if it will boot up
Score
0
July 25, 2011 10:07:19 AM

ok this what i have done
safe mode driver sweep
reistalled all drivers with disc and pny driver for the gtx 460
havnt seen bsod yet bios set at default ram timing at default 9-9-9-24 1.5v
ran furmark just to see what happens screen froze about 5min in had to reset and reboot ran a game live for speed all was fine shut down pc
wert back and turned it on looks like it boot up fine but nothing on screen like there was no video out put had to restart many times to get every thing to boot up then shut down and rebooted booted up fine restarted all went fine left it for about 30min tried to boot up no screen couldnt tell if it acually boote dup or not with out screen reset and booted a couple of thime to get it back and this is where i am at work now cant mess with it now to see if it will boot up

http://valid.canardpc.com/show_oc.php?id=1922565

this is the power supply ive got
http://www.newegg.com/Product/Product.aspx?Item=N82E168...
and my case is
http://www.newegg.com/Product/Product.aspx?Item=N82E168...
video card
http://www.newegg.com/Product/Product.aspx?Item=N82E168...
cpu
http://www.newegg.com/Product/Product.aspx?Item=N82E168...
board
http://www.newegg.com/Product/Product.aspx?Item=N82E168...
ram
http://www.newegg.com/Product/Product.aspx?Item=N82E168...

WOW just noticed the ram voltage should be 1.67v--------------this could be a problem board is running at 1.5v? at default bios setting

ok with this build was wondering with all fans and 125w cpu. The plugs coming off my power supply to video card are all on the power cord for video card 1 x 2 x 6pin + 2 pin am i not getting all power the card needs psu is rated at 2 x +12v rails at 22amp per rail. On the motherboard i have 2 x 4pin which i am using both for the motherboard. Was wondering if the EUP ready has anything to do with this?


and thx for all the input you have givin me. I have givin all the info i can till you ask for more and what you need

this should all work together right i hope i am out of dollars to spend
PS how do I find out what i need to set all the bios setting s to for this build?

Thx dklhutto
Score
0
July 25, 2011 2:52:57 PM

Start small! People are jumping all over with rather extreme solutions. Earlier in the post it seemed the issue was ram, but then the story got a little mixed up. I still think the issue is the ram, either the settings, or the brand is incompatible. I would run the windows mem test and see what happens. If t passes the extended tests then move on to drivers or the graphics card. Like some of the other posts recommend.
If it fails try it again with only 1 stick of ram. If it still fails try one of the other sticks of ram. If it still fails try another slot. If it still fails try either different brand ram or try to use the lowest preset ram setting in the bios.
Score
0
July 25, 2011 3:15:20 PM

bucknutty said:
Start small! People are jumping all over with rather extreme solutions. Earlier in the post it seemed the issue was ram, but then the story got a little mixed up. I still think the issue is the ram, either the settings, or the brand is incompatible. I would run the windows mem test and see what happens. If t passes the extended tests then move on to drivers or the graphics card. Like some of the other posts recommend.
If it fails try it again with only 1 stick of ram. If it still fails try one of the other sticks of ram. If it still fails try another slot. If it still fails try either different brand ram or try to use the lowest preset ram setting in the bios.


http://www.newegg.com/Product/Product.aspx?Item=N82E168...

This is the memory he has... 8-8-8-21 @ 1.5v. He did the windows memory diagnostic if you'd read the entire post... I also told him to test memory one module at a time and in different sockets. Either it's a bad module or a bad socket or, as microsoft puts it, bad drivers, bad video card a corrupt operating system... the underlying problem is that he switched EVERY single piece of hardware without re-installing windows. If you know ANYTHING about Microsoft you'd know Microsoft doesn't play well with that unless you re-install the operating system. It's a pain in the ass, but re-installing the OS obliviates a corrupt OS or driver conflicts...

Try changing video adapters.
Check with your hardware vendor for any BIOS updates.
Disable BIOS memory options such as caching or shadowing.
If you plan to debug this problem, you might find it difficult to obtain a stack trace. Parameter 2 (the exception address) should identify the driver or function that caused this problem.
If you do not know the specific cause of the exception, consider the following items:
Hardware incompatibility. Make sure that any new hardware installed is listed in the Microsoft Windows Marketplace Tested Products List.
Faulty device driver or system service. A faulty device driver or system service might be responsible for this error. Hardware issues, such as BIOS incompatibilities, memory conflicts, and IRQ conflicts can also generate this error.
If the bug check message lists a driver by name , disable or remove that driver. Also, disable or remove any drivers or services that were recently added. If the error occurs during the startup sequence and the system partition is formatted with NTFS file system, you might be able to use Safe Mode to rename or delete the faulty driver. If the driver is used as part of the system startup process in Safe Mode, you have to start the computer by using the Recovery Console to access the file.


Score
0
July 25, 2011 3:18:51 PM

mentioned the ram voltage as the 1st reply to this post and once again later--the link for your ram clearly says 1.65v and you said its 1.5v in the bios so thats liable to blue screen you

Score
0
July 25, 2011 3:21:08 PM

dklhutto said:
ok this what i have done
safe mode driver sweep
reistalled all drivers with disc and pny driver for the gtx 460
havnt seen bsod yet bios set at default ram timing at default 9-9-9-24 1.5v
ran furmark just to see what happens screen froze about 5min in had to reset and reboot ran a game live for speed all was fine shut down pc
wert back and turned it on looks like it boot up fine but nothing on screen like there was no video out put had to restart many times to get every thing to boot up then shut down and rebooted booted up fine restarted all went fine left it for about 30min tried to boot up no screen couldnt tell if it acually boote dup or not with out screen reset and booted a couple of thime to get it back and this is where i am at work now cant mess with it now to see if it will boot up

http://valid.canardpc.com/show_oc.php?id=1922565

this is the power supply ive got
http://www.newegg.com/Product/Product.aspx?Item=N82E168...
and my case is
http://www.newegg.com/Product/Product.aspx?Item=N82E168...
video card
http://www.newegg.com/Product/Product.aspx?Item=N82E168...
cpu
http://www.newegg.com/Product/Product.aspx?Item=N82E168...
board
http://www.newegg.com/Product/Product.aspx?Item=N82E168...
ram
http://www.newegg.com/Product/Product.aspx?Item=N82E168...

WOW just noticed the ram voltage should be 1.67v--------------this could be a problem board is running at 1.5v? at default bios setting

ok with this build was wondering with all fans and 125w cpu. The plugs coming off my power supply to video card are all on the power cord for video card 1 x 2 x 6pin + 2 pin am i not getting all power the card needs psu is rated at 2 x +12v rails at 22amp per rail. On the motherboard i have 2 x 4pin which i am using both for the motherboard. Was wondering if the EUP ready has anything to do with this?


and thx for all the input you have givin me. I have givin all the info i can till you ask for more and what you need

this should all work together right i hope i am out of dollars to spend
PS how do I find out what i need to set all the bios setting s to for this build?

Thx dklhutto


This memory you have listed are only 1GB modules and your original post you said gskill 2x2gb 10666 8-8-8-21 ddr3 1333 so you're mistaken somewhere. Do you have 4GB of memory or 2GB?? Because both are different...
Score
0
July 25, 2011 3:28:10 PM

yes i agree i was wrong and the voltage should be 1.67v at the timing 8-8-8-21
but default bios is at 1.5v and timing is 9-9-9-24 which in my book should be stable
V
ASRock M3A770DE QVL Rev 1.02 24/08/2010
DDR3-1333

1GB G.SKILL F3-10666CL8D-4GBHK DS V ---------this is what i have right
2GB G.SKILL F3-10666CL8D-4GBRM DS V
2GB G.SKILL F3-10666CL8D-4GBECO DS V
Score
0
July 25, 2011 3:28:32 PM

mcnumpty23 said:
mentioned the ram voltage as the 1st reply to this post and once again later--the link for your ram clearly says 1.65v and you said its 1.5v in the bios so thats liable to blue screen you


The link he gave are only 1GB modules in his OP he said he had 2GB modules... 1GB and the 2GB versions run on different voltages. So he needs to look at his memory's packaging and be certain, not conflicting because he's confusing me.
Score
0
July 25, 2011 3:32:38 PM

RussK1 said:
The link he gave are only 1GB modules in his OP he said he had 2GB modules... 1GB and the 2GB versions run on different voltages. So he needs to look at his memory's packaging and be certain, not conflicting because he's confusing me.


yeah--i wasnt arguing with anyone--as you say it got confusing over which ram he had--hopefully if its the 1.65v ones and that will be the problem as hes got 1.5v in bios
Score
0
July 25, 2011 3:32:59 PM

dklhutto said:
yes i agree i was wrong and the voltage should be 1.67v at the timing 8-8-8-21
but default bios is at 1.5v and timing is 9-9-9-24 which in my book should be stable
V
ASRock M3A770DE QVL Rev 1.02 24/08/2010
DDR3-1333

1GB G.SKILL F3-10666CL8D-4GBHK DS V ---------this is what i have right
2GB G.SKILL F3-10666CL8D-4GBRM DS V
2GB G.SKILL F3-10666CL8D-4GBECO DS V


I don't know, is it? What does it say on the side of the memory? Here's what newegg says for this memory-

Model
Brand
G.SKILL
Model
F3-10666CL8D-4GBHK
Type
240-Pin DDR3 SDRAM
Tech Spec
Capacity
4GB (2 x 2GB)
Speed
DDR3 1333 (PC3 10666)
Cas Latency
8
Timing
8-8-8-21
Voltage
1.5V

and here's Gskill-

http://www.gskill.com/products.php?index=95
Score
0
July 25, 2011 3:43:17 PM

mcnumpty23 said:
yeah--i wasnt arguing with anyone--as you say it got confusing over which ram he had--hopefully if its the 1.65v ones and that will be the problem as hes got 1.5v in bios


Yeah I'm not trying argue he just needs look at the side of the memory it'll state timings and voltage. There's 2 sides to the coin, too low of a voltage = instability and too high of of a voltage = dead memory... the latter being the worse of the two.

F3-10666CL8D-4GBECO

he also mentioned this memory which runs on 1.35v...

http://www.gskill.com/products.php?index=245
Score
0
!