P8Z68-M Pro Issue

[StormlessWolf]

Hey Guys!,

I just built a new PC for a customer and am running into an issue. 1st, heres what the parts:

ASUS P8Z68-M Pro Motherboard
I3-2100 Sandy Bridge (utilizing the onboard HD graphics)
Crucial M4 64g SSD (utilizing ACHI)
Corsair CX500 PSU (500 Watts)
G-Skill DDR3 1066 Ram (2x2 gig sticks)
Pioneer DVD Drive

So heres the issue: Everytime windows goes to load, it restarts itself. Upon restart, windows startup recovery launches. When I repair the repair mode, it is unable to repair the drive. However, if I have the system restored to a recent working point, it loads into windows. However soon as I restart, back at square one....

As far diagnostics go, I checked the RAM and found zero errors. All connections are good, temps on CPU and Mobo are right on (40 C and 30-33 C)

Whats your guys input?

 

[GhislainG]

I'd test with a different SSD or hard disk.

 

[StormlessWolf]

Apparently its the Intel HD 2000 graphics. Soon as I disabled it, the pc workewd without a hitch!...gonna have to talk to intel about this one.

 

[StormlessWolf]

Ok, now after installing the new drivers that work...my system doesn't shutdown fully. Within 5 seconds of it turning itself off, it wakes up! I've tried disabling all the wake on lan configurations, editing power management cycles and even diving into the registering. Any thoughts??? I am baffled..

Thanks!

~SW