Sign in with
Sign up | Sign in
Your question

Can't change from "Auto" with GA-Z77-3DH

Tags:
  • Gigabyte
  • Overclocking
  • BIOS
  • Motherboards
Last response: in Motherboards
Share
April 27, 2012 9:10:16 AM

Hey all
I don't know why but I can't change any of the overclocking features (frequency/multiplier/voltage) in the BIOS from the advanced section. They say "Auto" and don't allow me to change (or even show any other values).
If I go to the 3D bios, I can change from there but I find that annoying.
I'm assuming that I need to enable/disable something to get it working but can't figure out what.
Anyone have any ideas?
Thanks
Alan

More about : change auto z77 3dh

April 28, 2012 2:03:26 PM

I have a GA-Z77-UD5H and I have the same problem. Not sure what's going on with it. I am on the latest BIOS F6.
April 29, 2012 9:33:25 PM

Ok I don't know if the issue you have is the same as mine but I found that the BIOS doesn't work the way I thought it did. I was trying to click or press enter to change the value in the advanced mode but that doesn't work, you have to use the page up/Page down keys on the keyboard to change values.
April 30, 2012 7:53:57 AM

lol.... I was just coming in to say the same thing. + & - works as well, along with entering manual numbers where there is the option
!