Sign in with
Sign up | Sign in
Your question

VIEWSONIC 24\

Last response: in Graphics & Displays
Share
March 10, 2011 12:48:15 PM

WHEN I TURN ON MY VIEWSONIC 24" MODEL#VT2430 THE VIEWSONIC LOGO COMES ON/// AND THATS ALL/// IS THERE A FIX? THANKS BOB

More about : viewsonic

March 10, 2011 3:22:41 PM

Have you tried a different computer with that monitor
or
have you tried a different monitor with that computer
you need to find out if your getting a good video signal
from tower
also good to know if monitor works ok with another tower
also what connection are you using VGA,DVI or HDMI?
March 10, 2011 5:35:07 PM

THIS IS A FLATSCREEN TV
Related resources
March 10, 2011 7:39:08 PM

Sorry no need to SHOUT
This is a computer forum after all :) 
Good thing I installed home theater systems for over 10 years
and might actually think about helping you LOL
remember we dont get paid here :) 
stop using all caps
it is the computer version of shouting
anyway
what source are you hooked up to
cable,satellite,dvd etc

Usually will need to change the input on tv to
match your source

so for example if your cable is connected to Video 1
then on the remote you would look for a button labeled
something like (input) (source) etc and press it
until video 1 (AV1) is picked.
Make sure your source is turned on.
looking at this
http://www.viewsonic.com/products/vt2430.htm
and this
http://www.viewsonic.com/assets/032/8696.pdf
it is labeled as source

You need to look on input panel and see where your cables are connected
into (always a label on them)
Since you didnt give much info
It would help to know what is connected and with what kind of cables
Composite (Red White Yellow),HDMI,Coaxial (screw on cable type) etc
March 10, 2011 7:50:35 PM

sorry didnt mean to step on any keys haha thanks for the info get back with you later thanks again
March 10, 2011 7:54:12 PM

No problem :) 
I will check thread later
!