Assistance Needed for Matching RAM Kit

[brandon0921]

I currently have GB of 2x2GB of G Skill Ripjaw memory (mo# F3-1700CL82GBXMD) running at 6-8-6-20 1t @ MHz and I am unable to find a matching kit of the same stuff ANYWHERE!!! I have scoured the web, checked Ebay, contacted the manufacturer and come up short. I am extremely satisfied with the kit and would like to add another to increase capacity, but I am unwilling to worsen my timings. Does anyone know of a similar kit that can achieve these timings? Is there anything anyone can suggest, I am at a loss.

Relevant Specs:

Intel i7 2600k OC'ed to 4.6 on partial water (Corsair h90)
Asus Maximus IV B3 revision mobo

 

[THE UNKNOWN]

www.newegg.com/Product/Product.aspx?Item=N82E16820231351

www.newegg.com/Product/Product.aspx?Item=N82E16820231352

www.newegg.com/Product/Product.aspx?Item=N82E16820231354

 

[drwho1]

4 x DIMM, Max. 32GB, DDR3 2200(O.C.)/2133(O.C.)/1866(O.C.)/1600/1333 Hz Non-ECC, Un-buffered Memory
Dual Channel Memory Architecture
Supports Intel® Extreme Memory Profile (XMP)
* According to Intel® SPEC, the Max. 32GB memory capacity can be supported with DIMMs of 8GB (or above). ASUS will update QVL once the DIMMs are available on the market.
* Refer to www.asus.com or user manual for the Memory QVL (Qualified Vendors Lists).
* Due to CPU behavior, DDR3 2200/2000/1800 MHz memory module will run at DDR3 2133/1866/1600 MHz frequency as default.

is hard to tell you exactly, because I don't know at which speed your ram runs...
Check that first... the memory specs of your motherboard are posted above.

 

[drwho1]

Link: http://www.asus.com/Motherboards/Intel_Socket_1155/Maximus_IV_Extreme/#specifications

 

[brandon0921]

Sorry the spell check must have removed the speed from my original post. Im running 6-8-6-20 1t @ 1866mhz.

 

[drwho1]

not sure about your timings...
but check here: this are 1866 so they should be compatible
you might need to adjust the timings though. (or set the ram in your bios to default and go from there.
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007611%2050008476%20600006069&IsNodeId=1&srchInDesc=1866&name=8GB%20%282%20x%204GB%29&ActiveSearchResult=True&Pagesize=20

 

[brandon0921]

I cant imagine the timing on any of those getting down to where I need it. My kit was sold at a cas 7 or 8 with speeds of 2133 or 2200. Cant remember exactly.

 

[drwho1]

I cant imagine the timing on any of those getting down to where I need it. My kit was sold at a cas 7 or 8 with speeds of 2133 or 2200. Cant remember exactly.

OK, the best and easier way to find out is:
turn off PC
open case and remove one Dimm, write down exactly what is says on the module.

This would greatly narrow down your search.

post back, with the exact model and speed on your module, is the best way to help you out.

 

[brandon0921]

G. Skill Ripjaws Turbulence f3-17000CL8-2GBxMD is what my memory is according to CPUID.