Sign in with
Sign up | Sign in
Your question

Catalyst control centre settings

Last response: in Graphics & Displays
Share
March 12, 2011 8:37:54 PM


for the anti-alaising should i tick the box that says(use application settings)
for the anisotropic filtering,should i do the same?? and what about disable catalyst A.I. option,what does that do??
also the...MITMAP DETAIL LEVEL...ENABLE ADAPTIVE ANTI-ALAISING...OPEN GL SETTINGS(TRIPPLE BUFFERING)...and also..WAIT FOR VERTICAL REFRESH(performance or quality)

NZXT apollo case
Gigabyte GA-EP45-UD3L, Intel P45/LGA775/ATX

4GB KIT(2x XMS2 2GB) Corsair 'XMS2' [TWIN2X4096-6400C5], DDR2/PC6400/800MHz
550W Greatwall -psu

500GB Seagate ‘Barracuda’ [ST3500418AS], 7200.12/SATA/16MB CACHE

Intel® Core™2 Duo E7600, 3.06GHz/FSB1066MHz/3MB Cache/LGA775
XFX HD 4770 512MB 128Bit,
a b U Graphics card
March 13, 2011 12:41:34 AM

I think it's best for you and your graphics card to have it ticked as Application Settings, Disabled AAA, VR as Performance, and balance everything else.
March 13, 2011 1:38:32 AM

ok,my video card is old tech now,thanks for the advice
!