1600 mhz ram running at 1333 ?????

[numlauf]

my ram is: patriot g2
2x8gb
DDR3 1600 (PC3 12800)
9-9-9-24
1.6V

my mother board is: biostar tz77xe3
Support 4-DIMM DDR3-2600(OC)/2400(OC)/2133(OC)/1866(OC)/1600/1333 up to 32G maximum capacity

it reads my ram as 1333, i did a manual configuration in the bios to 1600 and set the voltage to 1.6

iv been over clocking my cpu and randomly get a BSOD occasionally, idk what i should do. should i set my ram and voltage back to auto in my bios?, or should i configure my bios difrently?, or is it okay how i set it ?
idk weather my bsod is coming from my ram or cpu it happens about once a day so its hard to single it out.
thanks nick

 

[tonync_01]

I would try manually setting the timings to the manufacturer recommended, if you haven't yet. To figure out about bsod just only overclock one component at a time a stress test to see where your problem is.

 

[Rockdpm]

Go into your BIOS and set the ram at the listed frequency on the box. good to go!

 

[numlauf]

okay i have it set manualy for 1600mhz but in cpuz it is telling me my dram frequency is 800.2 MHz ??? is that normal ?

 

[THE UNKNOWN]

1600mhz isn't real speed of RAM
The real speed is half of it that's 800mhz Its the reason cpuz showing only 800mhz and its normal thing dont worry about it

 

[numlauf]

thanks. i made a feew more changes in the bios and am a 4.5 ghz 4 hours into prime 95 with no BSOD and max temp of 74C