Closed Solved

Memory compatibility

hey will G.Skill RipjawsX 4 GB RAM (F3-12800CL9S-4GBXL) work with my mother board

Intel Desktop Board DH55PJ

please reply fast

its ddr3 1600 and my motherboard is ddr3 1333 .

will it work or will it affect the performance ? reply fast :cry:
11 answers Last reply Best Answer
More about memory compatibility
  1. you're fine. you may need to underclock the ram in the bios but it will work.
  2. hey what about this is this good ...and will it work perfectly on my board :??:

    G.Skill RipjawsX DDR3 4 GB PC RAM (F3-10666CL9D-4GBXL)
  3. yes, quite a few folks get that.

    as long as you stay with 1.5 volt RAM, which both sets are, your good.
  4. hey bro 1 last thing so should i go for the second one with the DDR3-1333 ..will it wok perfectly ? no adjustments needed na ? :o
  5. Best answer
    Intel® Desktop Board DH55PJ
    Two 240-pin DDR3 SDRAM Dual Inline Memory Module (DIMM) sockets
    Support for DDR3 1333 /1066 MHz DIMMs
    Support for up to 8 GB of system memory

    don't worry if the G.Skill is not list under the tested memory, they don't have time to test ALL ram just what is around the bench at the time. just pop it in and your good to go.
  6. Best answer selected by cesare borgia.
  7. bro am in mess again 1 last help .....

    please visit this link and tell me is it 1 stick of 4 gb or 2 sticks of 2 gb each :cry:

    its written - Memory Type: 4 GB (2 x 2 GB) 1333 MHz DDR3 DIMM

    link ---->>>
  8. if that is one 1 stick it will still work. you lose at the most 5% without dual channel (2 sticks)
    your motherboard has 2 slots, 4 gigs in each max for 8 total.

    EDIT: that is 2 sticks
  9. i alreay have one ram installed and the sales man said that its 1 stcik
  10. oh? ok. you will be fine.
  11. This topic has been closed by Nikorr
Ask a new question

Read More

Memory DDR3 Compatibility Motherboards