I5 2500k Right Temps?

STOPOT

Distinguished
Apr 21, 2009
238
0
18,690
Hey,
I just replaced my thermal compound on my stock intel cooler with AS5, I've been running it in TF2 for a little while and I get 98C across the board. I know its supposed to cure for a little while, but 98C off the bat seems a bit high, what do you guys think? Thanks
 

STOPOT

Distinguished
Apr 21, 2009
238
0
18,690
The reason I went to reapply thermal was because it was getting these temps before. I don't OC. People say hyper 212 is good, but I don't know, if I'm getting one any ways why don't I just get nhd14 or h80 with changed fans, that way I can future protect a bit as well.
 

ammaross

Distinguished
Jan 12, 2011
269
0
18,790
I'd check to make sure you're not viewing in F rather than C. My i5-2500k, overclocked to 4.4 barely tips 119*F. 98*C = 208*F, which is about where the mobo will shut off to protect from damage. What are you using to check your temps?
 

crate

Distinguished
Jul 19, 2011
20
0
18,510


What is the "card method to spread" ? What do you mean by that?
Maybe refer to a guide?

Thank you
 

STOPOT

Distinguished
Apr 21, 2009
238
0
18,690
Just do a search for thermal compound card method. Use a card to spread out paste instead of using heat sink to press down. That way you can make sure you get a even and wide coverage.