BIOS

[cybersrs]

Hello!

Please, help me if you can... I would really appreciate it!

Well, I update the motherboard BIOS to the last version, 3402 and the Turbo Ratio or CPU Ratio is missing from the BIOS and
TurboV EVO application... I have tried to downgrade to the backup version and still missing.
I did use EZ Flash BIOS and Asus Updater application, both ways.
I also tried to Clear CMOS and change the CPU from i7 2600k to i5 2500k.
Btw, the motherboard is ASUS P8Z68-V PRO.

 

[clutchc]

Are you using the EFI BIOS? If so, according to the manual, it should be under the 'Advanced' tab. Do you have the BIOS manual? If not download it here: http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z68V_PRO/#download

 

[cybersrs]

Are you using the EFI BIOS? If so, according to the manual, it should be under the 'Advanced' tab. Do you have the BIOS manual? If not download it here: http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z68V_PRO/#download

It is not here.

 

[clutchc]

I'm not familiar with those BIOS update programs. Is it an automatic update,or do you have to choose the BIOS version yourself?

 

[cybersrs]

It is "U"EFI Bios, is it wrong?

 

[clutchc]

Not necessarily. The U stands for Unified: Unified Extensible Firmware Interface (UEFI). It's a GUI version of the old DOS-like BIOS we all love.

I was just wondering if you chose the wrong BIOS for your update. But if the updating pgm you used automatically picks the correct update for you, that shouldn't be the case. You might try unplugging your PSU, removing the CMOS battery, and jumper the CLRTC pins* for about 5 seconds. Then reverse the steps and try your BIOS setup again.

* Page 2-20 sec. 2.2.7 of your manual.
http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z68V_PRO/#download

 

[cybersrs]

Not necessarily. The U stands for Unified: Unified Extensible Firmware Interface (UEFI). It's a GUI version of the old DOS-like BIOS we all love.

I was just wondering if you chose the wrong BIOS for your update. But if the updating pgm you used automatically picks the correct update for you, that shouldn't be the case. You might try unplugging your PSU, removing the CMOS battery, and jumper the CLRTC pins* for about 5 seconds. Then reverse the steps and try your BIOS setup again.

* Page 2-20 sec. 2.2.7 of your manual.
http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z68V_PRO/#download

I did it, still not working.
I have the same problem this guys have, in his threat you can see the screenshot:
http://rog.asus.com/forum/showthread.php?14888-Missing-some-options-in-BIOS-%28Z77-Sabertooth%29

 

[clutchc]

It looks like you've been researching this well. From the posts, it appears to be an issue that should be taken up with Asus. But if the Asus forum can't supply an answer, it doesn't sound very promising, does it. Perhaps you can contact Asus directly with the issue and wait for a reply. I wish you luck.

 

[fac51]

Same issue, I contacted Asus and they've told me to wait for a BIOS update.

 

[clutchc]

Same issue, I contacted Asus and they've told me to wait for a BIOS update.

In a way, that's good. That means they are aware of the problem and it's not an issue on your end. Just a matter of time...