310 elite power switch to motherboard

[Drezi]

Hello, i am building a new computer and my cooler master 310 elite case has connections from the power switvh to the mobo sitting around not plugged in yet. I am unaware of how they are supposed to be connected and in what order. i have 5 small connectors labeled; H.D.D. LED, POWER SW, RESET SW, POWER LED+, and POWER LED-.

 

[Motopsychojdn]

Check your motherboards manual for the header layout for the front panel header
Moto

 

[Drezi]

the mobo does not have a manual as it came from an old HP 210y :/
i saw another thread like this with the same case.
http://www.tomshardware.com/forum/293078-31-build-major-problem-turn
however the solution was never posted... -,-

 

[Motopsychojdn]

Ok, on the mobo should be some pins, possibly in a rectangular box, possibly not, but near them on the mobo is printed the markings you posted, identify each pin and connect the relevant connector
Moto

 

[Motopsychojdn]

Or download cpu-z, that will tell you the mobo model, google that models manual and you should find the diagram I mentioned before
Moto

 

[Drezi]

i could not find the user manual. the mobo i have is a: foxconn h-rs880-uatx

When it was in the HP, the power button was hooked up with a usb outlet to make one connector. hopefully that helps.

 

[Drezi]

i should also add that from the original post, half of it is new. the rest comes from an hp 210y.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02016581&tmp_track_link=ot_faqs/top_issues/en_us/c02016581/loc:2&lc=en&dlc=en&cc=us&site=null&key=null&product=4160015#N341

i have the mobo, proccesor, and ram from this. everything else is new.

i have a xfx 5770.
antec 430watt psu
500gb HDD
cooler master 310 elite
(took out the wireless)
2 120mm fans (one for front and one for side of the case)

 

[Motopsychojdn]

Ok, like I said originally, you need to look at the mobo and identify the pins then,
Moto

 

[Motopsychojdn]

Right, I'm home now on the pc googled 'h-rs880-uatx manual and found http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&lang=en&docname=c01925486&product=4007354#N498 and http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&docname=c01925486&product=4007354&lang=en& but you'll have to DL the pdf's and look through them
theres a motherboard layout on there, your frontpanel header is down on the right, near the sata ports, look on the pins there for which is which, unless you bring your pc to me, thats all I can do man
Moto

 

[Motopsychojdn]

In fact, I just followed your link, and found the same page,....
Moto

 

[Drezi]

i managed to get it running using the old on/off switch from the other case. i took out the wires i got for the pwr, reset, and leds and just put in the start switch from the other case that came with a full 9 pin connector and wired it in. it starts up and i guess it works for now. no need for me to use the other ones seen as though it works.

hope you understand what i am saying seen as though i'm not fully awake right now

 

[Motopsychojdn]

Yup, instead of using the buttons on the new case, you've wired in the old ones, I have a similar mod on my case atm, if you have that one-piece adaptor thing, see which lead is plugged where on it, and match up the same plugs on the new cases buttons, or you can leave it as is if your happy
Moto