Sign-in / Sign-up
Your question

Need HELP PLEASE

Tags:
  • Chipsets
  • Graphics Cards
  • Motherboards
  • Displays
Last response: in Motherboards
June 13, 2012 2:20:44 AM

Hello everyone

I just recently finished building my mobo

Ones done i proceeded to turning it on and
it would show the boot options and turn off
then back on in a continuation.

A member on the forum told me to take out the
memory and leave one stick
or take out the video card and so i did.

Memory did not change a thing but as soon as
i took out the video card and turned on the mobo
this time it would stay on.

Problem is i cannot see anything on my monitor cause
the video card was providing the display.

I do not find and integrated display port on my mobo
all except for one named HDMI which i have no access to.

Can anyone help me out here???

Was it the video card that was causing this turning on and off
and back off???

I just want to add that the video card does display the bios for a few seconds then
the mobo shuts down and back on over and over.

BTW

i am running a gigabyte g1 sniper2 motherboard

and a Asus GTX 590.

More about : question

a c 436 V Motherboard
a b U Graphics card
June 13, 2012 11:39:57 AM

Please list your power supply specs, including brand, model number, and the 12v rail rating. Use an esd strap before touching any more components, especially when handling them several times. It's much safer, and they don't cost much locally. Finally, be sure your video card power connection is correct. If you have a low end power supply, you may need to borrow a low end video card for testing only.
m
0
l
June 13, 2012 4:11:06 PM

Specs

MOBO:Gigabyte G1 Sniper 2

CPU: i7 3770 IVY

MEMORY: CORSAIR Vengeance 32GB

VIDEO CARD: ASUS GTX590

POWER SUPPLY: 1000 WAT




THE MOBO IS ON MY TEST BENCH WITH ONLY CPU AND M/B
POWER CABLES CONNECTED.

HAVE SWAPPED COMPONENTS ALL AROUND

TAKING THEM ON AND OFF

VIDEO CARD OR NOT

STILL BOOT LOOPS

MEMORY OR NO MEMORY
1 MEMORY STICK 2 MEMORY STICKS IN DIFFERENT SLOTS

STILL BOOT LOOPS ON AND OFF ONLY SHOWING THE GIGABYTE LOGO
AND THE BOOT OPTIONS UNDER IT LIKE (F12) (DELETE) ETC.

EVEN WHEN THIS SHOW AND I PRESS THEM ON THE KEYBOARD NOTHING HAPPENS.

IT JUST KEEPS BOOT LOOPING ON AND OFF.

I TOOK OUT THE CPU CHECKED IT AND ALL THE PINS ARE FINE.

I AM SURE I PLACED THE CPU CORRECTLY.


I HAVE TRIED EVERYTHING



m
0
l
a c 436 V Motherboard
a b U Graphics card
June 13, 2012 4:19:52 PM

Again, check the power supply label for the brand and 12v rail rating in amps. There are some flaky 1000w power supplies out there, believe it or not.
m
0
l