Sign in with
Sign up | Sign in
Your question
Closed

Confused (24pin)

Last response: in Motherboards
Share
June 13, 2012 2:20:53 AM

hello,
i started building my new pc, but im confused my 24pin has 2 ends, one 18pin and the other one is 10pin, which one should i plug or should i plug both of them and im using seasonic 860w.

thanks i need help asap.

More about : confused 24pin

a c 1029 V Motherboard
June 13, 2012 2:29:55 AM

If you are talking about into the PSU then the answer is yes! All the ports on the PSU are labelled.
June 13, 2012 2:36:39 AM

rolli59 said:
If you are talking about into the PSU then the answer is yes! All the ports on the PSU are labelled.


i know they are labelled but the end of the 24pin (where you plug it in the psu) is splited into a 18pin and 10pin, should i plug both or just one?
Related resources

Best solution

a c 1029 V Motherboard
June 13, 2012 2:39:48 AM
Share

Yes both top and bottom where it says motherboard!
June 13, 2012 2:42:31 AM

Best answer selected by Badr22.
June 13, 2012 2:45:17 AM

rolli59 said:
Yes both top and bottom where it says motherboard!


thanks i was a bit hesitant, and is it fine to have the psu upside down(fan facing down, and btw i lost one of the hyper 212 evo screws, is it ok to only use 3 screws?
a c 1029 V Motherboard
June 13, 2012 2:46:52 AM

No not for guarantied cooling performance.
a c 328 V Motherboard
June 13, 2012 9:15:43 PM

This topic has been closed by Nikorr
!