Will this PC setup work?

It will work but the selected GPU is low end for gaming! This would be the minimum I would buy! http://www.newegg.com/Product/Product.aspx?Item=N82E168...

Thanks for the info,

Yeah i know! Its just one I already have on hand and going to throw in there until I upgrade. But as far as the case goes I was thinking about this one instead

http://www.newegg.com/Product/Product.aspx?Item=N82E168...

Im worried about connecting all the fans in it though, because the MOBO only has one 3 pin chassis fan connector, and one power fan connector, are there ways to hook multiple fans to one connector? And i know some can hook directly into the PSU but im having trouble figuring out which ones can on that case. Was also wondering if upgrade to 8GB (2x4GB)of RAM is worth it?

With the range of parts you have selected, you may want to wait for Llano desktop parts. The integrated video of a Llano CPU is on par with a Nvidia 9800 (twice what you have selected, while the CPU performance is similar to what you have selected.

That being said, the chips aren't out yet, but they are starting to appear in retail stores so it should be available any day now.

http://www.eteknix.com/news/amd-llano-hits-retail-store...

Yeah that would be a good idea, but im not actually purchasing the GC I just put it in there because the MOBO doesnt have integrated graphics so I wanted to avoid that confusion, thanks for the input though!

Looks like a better case but what about PSU? One of the best budget cases http://www.newegg.com/Product/Product.aspx?Item=N82E168...

Was going to buy the PSU separate, same one as up there just separate, the reason the case was appealing was because of the combo deal it came with, the 8GB RAM

http://www.newegg.com/Product/ComboDealDetails.aspx?Ite...
Is 8GB worth the upgrade? And I was also worried the cables from the PSU might not reach the top 4 pin CPU PWR connector at the very top of the MOBO, seeming it is a bottom mounted case, same with the Antec you linked also, do most power supplies come with sufficient length cables?

Rosewill is not a good PSU here is a better unit if you are willing to deal with MIR http://www.newegg.com/Product/Product.aspx?Item=N82E168...
Or http://www.newegg.com/Product/Product.aspx?Item=N82E168...
Or http://www.newegg.com/Product/Product.aspx?Item=N82E168...

I dont get too excited about PSU's and prefer not to spend more if i dont have to, dont care much about efficiency, just need a unit to run my machine for a long time and not damage my hardware. But the first one is a good deal but ive never done a MIR but it just sounds like a bitch.

The problem with cheap generic PSU´s is that when they tend to die they take other more expensive parts with them which quality products don't do!

Thats true, but I just found out the rebate for the 70$ 500w PSU isn't there! Good thing i checked it first.

Im a little confused on this PSU's CPU power connector, http://www.newegg.com/Product/Product.aspx?Item=N82E168...
It says 1 x 4+4 Pin EPS 12V, im not sure about it and will it be compatible with my MOBOS 4 pin CPU connector...
http://www.newegg.com/Product/Product.aspx?Item=N82E168...

Yes it will be compatible, You just use 4 out of the 8 pins available for some boards that require 8pins so they make the connector split.