Missing Avivo Catalyst 11.4

Forum Graphics & Displays : Graphics Cards Missing Avivo Catalyst 11.4

Has anyone else had this issue ?
I have tried downloading it and installing it separately, that didn't work. I tried reinstalling the drivers and checking its ticked to be included, it was and the log file says its installed. But it isn't there.
I have looked under standard and advanced views.
Any ideas ?
Or do i just try a different driver ? Nice drivers except for this.

Mactronix

------------------------------ Barbah and Bottsie Boodles
Reply to mactronix

Under the 'Video' tab in the Control Center I have an 'AMD Video Converter'. Is that what you are looking for (and is not there) or are you looking for something else? Also, what card do you have (I see the above converter on my 4850).

Message quoted 1 times
Message edited by EXT64 on 05-01-2011 at 07:47:02 PM

------------------------------ 4 x AMD 6172 > Tyan S8812 > 32GB > X-1050 | i7 970 > P6X58D-E > 7970 3GB > 24GB | i7 3770k > P8Z77-V Pro > Classified 580 3GB > 16GB

http://piro.pirocast.net/badge/none/fah02/800/0/0/0/0/0/0/0/0/0/0/0/0/255/255/255/557101.png

Reply to EXT64

All I know is 11.4 broke crossfire. Retarded. At first there wasn't even an option for it in CCC, then after a reboot the option is there in the left panel, but there's no options for actually enabling it. I just rebooted again, and now the checkbox is there for enabling it, but there's some drop down box which is empty, something about selecting the GPU combination... so I can't apply crossfire. WTF AMD! I swear whoever makes drivers over there is some kind of stupid.

Reply to wolfram23

That is bad. Is everyone having this problem or is it an isolated case?

------------------------------ 4 x AMD 6172 > Tyan S8812 > 32GB > X-1050 | i7 970 > P6X58D-E > 7970 3GB > 24GB | i7 3770k > P8Z77-V Pro > Classified 580 3GB > 16GB

Reply to EXT64

EXT64 wrote :

Correct the video converter option is not there. Its a 5850 in the system in question.
I think im going to go for a differant driver and see if its the driver at fault.

Mactronix

------------------------------ Barbah and Bottsie Boodles
Reply to mactronix

Update... did another reinstallation of the latest drivers and it's working now. Still stupid to have to waste the time with it but I guess it was just a messed install (how? I don't know).

I recently went back to play Metro 2033 again, and I had a nice surprise. I don't know if it was drivers or maybe a game patch but I can now enable all settings max (including 4xAA and DoF) and the game is quite playable, generally 30-50fps (I think the min I noticed was 26 or 27). The benchmark showed 44fps average IIRC. Of course disabling just DoF or 4xMSAA improves FPS a lot, but last time I played through the game having both turned on caused FPS to drop right down to about 5. I used to think it was exceeding VRAM but I guess not.

FYI as for Avivo, it shows up in my installation package but I have not tried using it.

Message edited by wolfram23 on 05-02-2011 at 05:01:26 PM

Reply to wolfram23

Ask the community Add a reply

Related content

See all topics related to "Missing Avivo Catalyst 11.4"

Tom's Hardware > Forum > Graphics & Displays > Graphics Cards > Missing Avivo Catalyst 11.4

Go to:

Help |
Forum rules

There are 1828 identified and unidentified users. To see the list of identified users, Click here.

Page generated in 0.327 seconds

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel