Archived from groups: comp.sys.laptops (More info?)
at work i use a specific ip, dns, gateway, etc.
at home i use obtain automatically.
so that means that when i am at work i have to type in my network
settings, and to get onto my home network i have to set tcp/ip for
obtain automatically. is there a way to have two seperate profiles so
that i dont have to type in the tcp/ip properties every morning when i
get to work to log onto that wireless network?
Archived from groups: comp.sys.laptops (More info?)
it makes sense, but as far as I know, windows had not addressed that issue
yet. good luck.
I had that problem before when i used a wired connection.
I used to use a program that did that (allowed profiles), but costed money
if you want it for more than 30 days. There are several of those in the web.
I also had some batch file that did the settings, but that quit working
after certain windows update. You can try it:
http://www.jsifaq.com/SUBH/TIP3800/rh3858.htm Then you do a batch file with the line that restores the settings. I even
had a shortcut so I only had to press alt-X to change the setting to the
correct one. As I said, it quit working for me, but it may work for you.
Then I bought a wireless card, and use the wireless for home and wired for
work, so didnt have that problem anymore, so I didn't pursue other solution
guillermo
"nihilum" <nihilum@direcway.com> wrote in message
news:1120774262.922762.25700@z14g2000cwz.googlegroups.com...
> at work i use a specific ip, dns, gateway, etc.
>
> at home i use obtain automatically.
>
> so that means that when i am at work i have to type in my network
> settings, and to get onto my home network i have to set tcp/ip for
> obtain automatically. is there a way to have two seperate profiles so
> that i dont have to type in the tcp/ip properties every morning when i
> get to work to log onto that wireless network?
>
> hope this question makes sense.
>
> thanks in advance for any help
>
Archived from groups: comp.sys.laptops (More info?)
"nihilum" <nihilum@direcway.com> wrote in message
news:1120774262.922762.25700@z14g2000cwz.googlegroups.com...
> at work i use a specific ip, dns, gateway, etc.
>
> at home i use obtain automatically.
>
> so that means that when i am at work i have to type in my network
> (...)
Using Windows..? Then you can configure more than one network connections in Start |
Network Connections. Create one with your work settings and the other with your home
settings, put the shortcuts on the desktop and switch the connections as needed.
If you use IBM ThinkPad - it comes with a network profile manager to further simplify
things. Some other manufacturers include similar utilities.
Archived from groups: comp.sys.laptops (More info?)
On 7 Jul 2005 15:11:03 -0700, "nihilum" <nihilum@direcway.com> wrote:
>hope this question makes sense.
It happends to so many that it ought to be at FAQs everywhere (am sure
they are).
Here is cheap and ez way ---
Configure tcp/ip for DHCP like u do for home. Then on the same page,
notice ALTERNATE CONFIGURATION tab? That's right ! Place your work's
static configuration there. Your 'puter will first attempt to get an
address from a DHCP and if it doesn't find it within 30 seconds(?)
then it will use the static's.
You just have to put up with the 30 seconds delay start up at work,
but hey, that's just perfect to get that first cup of morning coffee
eh.
Like said, cheap&ez. If that doesn't appeal to u, there are other
methods$.
---------------
If your business is looking for quick free consulting,
please ignore my replies. I only wish to reply to other
engineers/administrators and home users who are stuck
and not interested to give your business free consulting.
Archived from groups: comp.sys.laptops (More info?)
"bobb" <None@NoWhere.com> wrote in message
news:tugrc111dqncjoa8faig0accuu7r0lgc75@4ax.com...
> notice ALTERNATE CONFIGURATION tab? That's right ! Place your work's
Yeah, that works with one caveat: some wireless cards/chipsets will not switch to the
alt config setting if the 'puter is put in either stand-by or hibernation mode and
awaken in a new network environment. Some D-link cards come to mind.
Archived from groups: comp.sys.laptops (More info?)
"Yeah, that works with one caveat: some wireless cards/chipsets will
not switch to the
alt config setting if the 'puter is put in either stand-by or
hibernation mode and
awaken in a new network environment. Some D-link cards come to mind. "
Yes, this is true. It happened to my old laptop. I still think using
a network profile manager (if your laptop came with one) is easier,
though.
>Yeah, that works with one caveat: some wireless cards/chipsets will not switch to the
>alt config setting if the 'puter is put in either stand-by or hibernation mode and
>awaken in a new network environment. Some D-link cards come to mind.
Am pleased to announce it works beautifully on my 3com x-jack.
---------------
If your business is looking for quick free consulting,
please ignore my replies. I only wish to reply to other
engineers/administrators and home users who are stuck
and not interested to give your business free consulting.
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.