Sesonic M12II 520W PSU motherboard's cable length

[clay9477]

Hi I am interested in making the purchase of this PSU but i do not know the length of the motherboard power supply cable. I intend to use this PSU in a Corsair 600T White Edition. I want to route it through the back to the top with the cable management of the case. Does anyone has this PSU? Do you mind measuring the length of the motherboard cable for me? Also if any of you have this inside a 600T White edition care to tell me if the motherboard power cable is long enough to be routed behind to reach the motherboard.

Thanks.

 

[Silvune]

I don't have either. But the JG review shows the following:
24pin length: 54cm
4+4pin length: 54cm
The 24pin should be able to be routed behind the motherboard tray no problem, but the 4+4pin would not.
The 4pin on my motherboard is not much longer than 50cm and I doubt it would reach in my case, which is smaller than the 600T.

So you can either buy an extension cable at the same time or buy a different PSU.
The Antec High Current Gamer HCG-520 is basically the same as the S12II Bronze 520, but it has a longer 4+4pin cable at 63cm (according to TPU).