Gd53 reboot and select proper boot device spinpoint

[Guest]

Hi,
I am doing my first home build with the following kit
MSI P67A-GD53
Corsair Vengeance 8gb (2X4 GB) PC3-12800
Samsung SpinPoint F3 1TB
i5 2500K
Be Quiet Dark Rock Advanced cpu cooler
Antec True Power New 650
ASUS Radeon HD 6850 SCS3
Samsung SH-B123L/BSBP Blu Ray
I can get into the EFI which has found the HDD and the memory test is fine.
However every reboot gives the message "Reboot and select proper boot device"
I'm not sure the Blu Ray is getting/sending signal but is definitely getting power.
Any suggestions?
Thanks for looking.
Ian M
P.S. Any suggestions what the four pins next to the SATA socket are for on the HDD?

 

[Guest]

Hi,
I am doing my first home build with the following kit
MSI P67A-GD53
Corsair Vengeance 8gb (2X4 GB) PC3-12800
Samsung SpinPoint F3 1TB
i5 2500K
Be Quiet Dark Rock Advanced cpu cooler
Antec True Power New 650
ASUS Radeon HD 6850 SCS3
Samsung SH-B123L/BSBP Blu Ray
I can get into the EFI which has found the HDD and the memory test is fine.
However every reboot gives the message "Reboot and select proper boot device"
I'm not sure the Blu Ray is getting/sending signal but is definitely getting power.
Any suggestions?
Thanks for looking.
Ian M
P.S. Any suggestions what the four pins next to the SATA socket are for on the HDD?

Hi all,
Big Noob blunder!!!!! I'd connected the SATA cable that feeds the external socket on top of the Define R3 case into the back of the Blue Ray!!! When I connected SATA cable from motherboard to Blu Ray it worked. Amazing really!!!!
Sorry to waste your time but perhaps it gave you a laugh?