First time diyer

[Newblood7]

so im doing my first build and i need help to make sure that every thing is compatible and i dont end up bottle necking or get part well past what i will every need i use it mostly for gaming and media any feed back or recommendations is much appreciated here is a list of the hardware and i do plan on adding another gpu down the road

Antec Lanboy air Red Black / Red ATX Mid Tower Computer Modular Case

MSI Z68A-GD65 (B3) LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard

Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor

Thermaltake Black Widow W0319RU 850W ATX 12V v2.3, EPS 12V v2.91 CrossFire Certified 80 PLUS BRONZE Certified Modular Active PFC Power Supply

EVGA SuperClocked 012-P3-1572-AR GeForce GTX 570 (Fermi) 1280MB 320-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card

Intel 320 Series SSDSA2CW160G3K5 2.5" 160GB SATA II MLC Internal Solid State Drive (SSD)

Seagate Barracuda XT ST32000641AS 2TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive

CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1866 (PC3 15000) Desktop Memory

LG Black Super Multi SATA WH12LS30 LightScribe Support - OEM


Window 7 64bit

thank u for ur time and help

 

[ElysianWhip]

Right off the start the only big thing I think is worth mentioning is your CPU. I don't know if you do a lot of heavy processing or video rendering, but the 2500k is plenty for just gaming. You may want to consider saving yourself the bit of money and lowering down the the 2500k instead of the 2600k.

Apart from that most of the stuff looks good to me.

 

[geekapproved]

or get part well past what i will every need i use it

HUH?


You want DDR3-1600 1.5v or less. Not DDR3-1866.

 

[Newblood7]

or get part well past what i will every need i use it

HUH?


You want DDR3-1600 1.5v or less. Not DDR3-1866.

sorry what i meant to say was part i wont ever rely use to full capacity such as ElysianWhip

said the 2500k is fine for just gaming and so i would have little need to get the 2600k and thanks for the tip on the ram like i said this is my first build and this is all more or less new to me