Status
Not open for further replies.

LevelUp_

Honorable
Mar 14, 2012
66
0
10,630
Setup
i5 3570k
OCZ Mod 600w PSU
8GB HyperX Ram
GB Z68MA-D2H-B3 Board

So I installed the CPU and connected all the power cables to the mobo, 20+4 and the other (idk what it's called) power cable to the motherboard. I press the power button on case and everything powers up fine except for the cpu fan which does a little twitch and then nothing, and the motherboard with has none of the LED's lit up.
How can I fix this problem
 
Solution
We may need to reset the BIOS? The right way!

Reset the CMOS memory the right way as is described in the motherboard manual using the clear CMOS link with the power cord unplugged.
And when the battery is out, press the power button to discharge all the electricity from the system.
How To Clear CMOS @ http://pcsupport.about.com/od/fixtheproblem/tp/clearcmos.htm
[flash=480,270]http://www.youtube.com/v/rdHH9KrceR0?version=3&feature=player_detailpage[/flash]
standoffs

acc%20bag%20standoff.jpg
 
We may need to reset the BIOS? The right way!

Reset the CMOS memory the right way as is described in the motherboard manual using the clear CMOS link with the power cord unplugged.
And when the battery is out, press the power button to discharge all the electricity from the system.
How To Clear CMOS @ http://pcsupport.about.com/od/fixtheproblem/tp/clearcmos.htm
[flash=480,270]http://www.youtube.com/v/rdHH9KrceR0?version=3&feature=player_detailpage[/flash]
 
Solution
Status
Not open for further replies.

TRENDING THREADS