Where does the 4 pin go on a Lancaster8-GL6?
Last response: in Motherboards
Hello,
I replaced the power supply on a Compaq SR5233wm and I cant remember where it goes. I cant even find a motherboard manual. Thanks in advance so very much. This thing has given me fits.
I replaced the power supply on a Compaq SR5233wm and I cant remember where it goes. I cant even find a motherboard manual. Thanks in advance so very much. This thing has given me fits.
More about : pin lancaster8 gl6
roosterwes said:
Hello,I replaced the power supply on a Compaq SR5233wm and I cant remember where it goes. I cant even find a motherboard manual. Thanks in advance so very much. This thing has given me fits.
The 4 Pin usually goes next to the CPU socket to provide power to the CPU. Check around the CPU socket to see if you can spot a 4 pin in a 2x2 arrangement.
Maxx_Power said:
The 4 Pin usually goes next to the CPU socket to provide power to the CPU. Check around the CPU socket to see if you can spot a 4 pin in a 2x2 arrangement.Thanks for the answers. It wasnt the big 4 pin that always goes on the motherboard, it was the small one thats always on the end of the powere run. I think I was probably waay tired. I guess I was talking about the one you hook into PCI add ons for extra power. I couldnt get that computer back up. I took the battery out and remembered that the jumper had fallen off the pins at the SATA 4 location. I finally got it back in the exact spot and reset the cmos. The display came back on, but I dont know why. Too many things at once for me. Thanks, guys.
Related ressources
- Looking at New Hardware - Forum
- Where does this go ? 3 Pin (VFR) - Forum
- At witt's end. All playback devices "not plugged in". - Forum
- Where does my new graphics card go in? - Forum
- 4 pin header(EZ_PLUG2) on rampage 4 extreme mother board DOES IT NEED CONNECTING - Forum
Best solution
roosterwes said:
Thanks for the answers. It wasnt the big 4 pin that always goes on the motherboard, it was the small one thats always on the end of the powere run. I think I was probably waay tired. I guess I was talking about the one you hook into PCI add ons for extra power. I couldnt get that computer back up. I took the battery out and remembered that the jumper had fallen off the pins at the SATA 4 location. I finally got it back in the exact spot and reset the cmos. The display came back on, but I dont know why. Too many things at once for me. Thanks, guys. Glad to hear the display came back on. Hope all is well from here on.
Related ressources:
- ForumPSU 20+ 4 pin connector does not fit snuggly with Mobo
- ForumConnect a 4 Pin Fan to P 4 C800-ED (for RPM)- Where to Find ..
- ForumWhat exactly does the 4 pin 12v power connector do?
- ForumWhere does the other 100 watts go ?
- ForumWhere does the Ac'97 and HDA cables go ?
- ForumWhere does this plug go ?
- ForumWhere do the front wires go ?
- ForumWhere to go from here?
- ForumWhere does the power switch go on a motherboard?
- ForumMy 3 pin case fan conectors wont go into 4 pin on my mobo?
- ForumIntel i5 3550p & AS Rock Z77 PRO 3
- ForumDoes Using Faster Memory Really Make A Difference
- ForumDoes this motherboard support DDR3 RAM?
- ForumDoes Ga-Z77X-UD3H support 1866 Memory?
- ForumDoes it matter?
- More resources
Read discussions in other Motherboards categories
!
