Hi, I was using Transcend 2Gb stick DDR3-1333
240P DDR3 DIMM(256Mx64)
(128Mx8/ DDR3 1333/ 9-9-9), 1.5V
This works perfectly on my machine, no problems whatsoever...
Now I bought a new RAM Kingston 4Gb, single stick
Description: 4GB 1333MHz DDR3 Non-ECC CL9 DIMM SR x8
Detailed Specifications: Standard 512M X 64 Non-ECC 1333MHz 240-pin Unbuffered DIMM (DDR3, 1.5V, CL9, FBGA, Gold)
the latter doesn't work, I keep gettin 3 beeps, which usually means no ram detected, I'm usin INTEL DP45SG EXTREME motherboard. I visited their website, unfortunately the ain't givin no support. I have a page from their website which could be helpful. http://www.intel.com/support/motherboards/desktop/dp45s...
Is there anyway I could get this new stuff workin ?? Please Please help.. I ain't no computer specialist !!!!!
here are a list of intel beep codes 3 beeps Intel bios beep codes
Reseat the memory.
Make sure that the contacts on the memory and the socket are clean.
Try removing one bank of memory modules at a time. (Some systems can require a memory module in Bank 0.)
Try using memory modules from the same manufacturer with the same part number and speed.
Check for a faulty memory module by trying the memory in a known good system.
I have this same motherboard and had ram problems so I did alot of research and found that this board is very picky on what kind of memory is used. What I found to work with this board is Kingston KVR1333D3N9K2/4G, hope this helps you out.