/ Sign-up
Your question

RAM Compatibility

  • Memory
  • RAM
  • Compatibility
  • Motherboards
  • Triple Channel
Last response: in Memory
August 11, 2012 7:59:52 PM

Is this ram kit compatible with my motherboard : X58A-UD7 (rev 2.0) ?

What is the max frequency ram i can use for my motherboard in triple channel configuration (with 3 modules only)?

More about : ram compatibility

Best solution

a c 1192 V Motherboard
a c 143 } Memory
August 11, 2012 9:29:14 PM

The memory controller tops out at DDR3 2200MHZ. So that RAM is within limits of the controller.

But sometimes, populating all the slots with the maximum number of sticks of the fastest memory the board can handle, may cause errors if the RAM isn't on the board's QVL.
August 11, 2012 9:29:24 PM

DDR3 2200/1333/1066/800 MHz your mobo speeds..

Yes it should be ok
Related resources
August 12, 2012 8:32:04 PM

Best answer selected by Supra1993.
a c 1192 V Motherboard
a c 143 } Memory
August 12, 2012 9:15:01 PM

supra1993 said:
Can i use this ram as well ?

Yes, but that will only work in dual channel mode. However that memory is rated at the same voltage as your board defaults to: 1.5V So it will work with no voltage adjustments.

The previous triple channel memory you selected will probably need you to increase the memory voltage in the BIOS for it to be stable, since the RAM is rated at 1.65V.

Ideally, you'd want to find triple channel memory rated at 1.5V if you just want to pop it in and go.

Do you have the board's manual? If not download it from the Gigabyte site and go to page 17 for memory instructions.