Sign in with
Sign up | Sign in
Your question

Computer turns off immediately after turning on

Last response: in Systems
Share
August 22, 2011 3:18:22 PM

I have a build working for month and half
Woke up this morning and the computer turns on the immediately turns off and continues to do so

I tried different ram
I used a jumper for the power supply and it runs everything else without shutting off
The CPU cooling isn't an issue the pump on my water cooling is working perfect
Is this my mobo?

Specs:
16gb ripjaw 1600mhz
intel core i7 2600k
Gigabyte d3-b3 z68 mobo
OCZ 700w Modx psu
Rasa 120 water cooling
Twin frozr 560ti
Haf 912
a b B Homebuilt system
August 22, 2011 4:06:23 PM

What, if anything, are you overclocking?
m
0
l
August 22, 2011 5:04:48 PM

No, But i don't think thats the case It only gets the the motherboard splash screen. Maybe. and then just turns off. Rma mobo ?
m
0
l
Related resources
August 22, 2011 5:05:54 PM

I cleared the Cmos did nothing either. Reinstalled heatsink, Checked ram and the psu powered everything but my mobo and cpu for an hour and then i turned it off so I don't think it's that
m
0
l
a b B Homebuilt system
August 22, 2011 5:11:16 PM

I suspect either the mobo or PSU at this point. I recommend you remove all devices (SATA/IDE, etc) and all but 1 stick of memory. See if the system will boot and let you into the BIOS. If successful, start reconnecting devices (start with your boot drive) to verify that the problem isn't a particular device "shorting" the system.

m
0
l
August 22, 2011 5:23:06 PM

Already tried, everything else runs when it is jumped so I don't think its getting shorted. I'm going to RMA the board and see if that's the problem. I have done all the tests I don't even get a beep
m
0
l
a b B Homebuilt system
August 22, 2011 5:26:01 PM

andrew1795 said:
Already tried, everything else runs when it is jumped so I don't think its getting shorted. I'm going to RMA the board and see if that's the problem. I have done all the tests I don't even get a beep

Good luck!
m
0
l
August 29, 2011 2:46:40 AM

Just an update to anyone having same problem, I had my 2600k at 5ghz Overclock was too high for the board and blew it. Got a new Asus Pro board and running smooth as butter
m
0
l
a b B Homebuilt system
August 29, 2011 11:29:30 AM

andrew1795 said:
Just an update to anyone having same problem, I had my 2600k at 5ghz Overclock was too high for the board and blew it. Got a new Asus Pro board and running smooth as butter

Good luck. OC in baby steps, my friend.
m
0
l
August 29, 2011 2:34:35 PM

Oh I did I just had the cheapest gigabyte z68 board.
m
0
l
!