Final Build Results

I think I've finally found all the parts to the computer I want to build. What do you guys think?

Case: Cooler Master Storm Enforcer
http://www.newegg.com/Product/Product.aspx?Item=N82E16811119240

RAM: G.SKILL Ripjaws 8GB
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231311

Processor: i7 2600K-Overkill I know but I want to future proof my PC
http://www.newegg.com/Product/Product.aspx?Item=N82E16819115070

Graphics Card: ASUS GTX460 1GB
http://www.newegg.com/Product/Product.aspx?Item=N82E16814121391

Power Supply: Pc Power and Cooling 650W
http://www.newegg.com/Product/Product.aspx?Item=N82E16817703026&Tpk=pc%20power%20and%20cooling%20power%20supply

Motherboard: ASRock P67 EXTREME4
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157229

Heat Sink: Cooler Master 212+
If it fits.
6 answers Last reply
More about final build results
  1. Fill out please
    http://www.tomshardware.com/forum/261222-31-build-advice
    In any case, the i7 2600K is defiantly not "future-proofing" especially when the 2500K performs at 98% of the 2600K in gaming. The HT isn't even a huge improvement. If you want "future-proofing" you would wait for Ivy Bridge. At this point in time though, nothing will "future-proof" because it's hard to say with this transition in tech.

    I.E, we expected the 5850/6850 to last a long time in gaming. It has, but with BF3's Alpha, we've started to question the tech we're using. Especially since at 1920x1080 the 570 is needed to run BF3 smoothly.
    As for CPU, the 955 still lasts to date and that was 3 years ago. So, there is no need to future proof now. Just save the money and upgrade later.

    For the GPU, pay a little more and you get a better card.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16814102948

    $5 more and you get a 750w HCG Antec, equally as good but more wattage.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16817371049&Tpk=750w%20hcg

    For the motherboard, I used to recommend the Extreme4 a lot, but now it's just to expensive for the boards out. Z68 offers more features and has become cheaper than P67.
    This board saves you a $20 offering similar performance.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16813128502&Tpk=z68%20d3h

    Save $5 for faster ram
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820211457
  2. IMHO, I would NEVER buy a plastic computer case!
  3. aznshinobi said:
    Fill out please
    http://www.tomshardware.com/forum/261222-31-build-advice
    In any case, the i7 2600K is defiantly not "future-proofing" especially when the 2500K performs at 98% of the 2600K in gaming. The HT isn't even a huge improvement. If you want "future-proofing" you would wait for Ivy Bridge. At this point in time though, nothing will "future-proof" because it's hard to say with this transition in tech.

    I.E, we expected the 5850/6850 to last a long time in gaming. It has, but with BF3's Alpha, we've started to question the tech we're using. Especially since at 1920x1080 the 570 is needed to run BF3 smoothly.
    As for CPU, the 955 still lasts to date and that was 3 years ago. So, there is no need to future proof now. Just save the money and upgrade later.

    For the GPU, pay a little more and you get a better card.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16814102948

    $5 more and you get a 750w HCG Antec, equally as good but more wattage.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16817371049&Tpk=750w%20hcg

    For the motherboard, I used to recommend the Extreme4 a lot, but now it's just to expensive for the boards out. Z68 offers more features and has become cheaper than P67.
    This board saves you a $20 offering similar performance.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16813128502&Tpk=z68%20d3h

    Save $5 for faster ram
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820211457

    Oh, sorry about that. Here it is.
    Approximate Purchase Date: Next week or two
    Budget Range: $700
    System Usage from Most to Least Important: Gaming, video editing (some), school work
    Parts Not Required: GPU, PSU, Keyboard, mouse, and monitor.
    Preferred Website(s) for Parts: Newegg
    Country of Origin: USA
    Parts Preferences: Intel definitely
    Overclocking: Maybe
    SLI or Crossfire: Maybe
    Monitor Resolution: 1600x900
    Yeah I already have the GPU and PSU, I just put them to make sure it's all compatible.
    Thanks for the information about the processor, any money saved is awesome. How about these two motherboards?
    http://www.newegg.com/Product/Product.aspx?Item=N82E16813128506 or http://www.newegg.com/Product/Product.aspx?Item=N82E16813157264 ? Are there any discernible differences? I don't know much about motherboards, so any help would be grateful.
  4. DelroyMonjo said:
    IMHO, I would NEVER buy a plastic computer case!

    I've heard that, but I've also heard that the Cooler Master is very sturdy. Are there any that you recommend? The Enforcer is as big as I can get, nothing taller than 19 inches :(
  5. The 2600K is clocked 3% faster than the 2500k and over all performs about 6% better .
    Since you can easily clock the 2500K 6% faster [ and much more ]without even changing the cooler] then the 2600k becomes an expensive waste of money for people who think there is future proofing .
    There isnt .
    By january all current sandy bridge processors will be last years junk.

    Spend the $100 you save on 1600MHz RAM ,

    A Z68 motherboard

    and a decent graphics card
  6. As stated, you don't need those boards. Expensive.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16813128502&Tpk=z68%20d3h
    Get another 460 1GB, at that res 1 isn't enough.
Ask a new question

Read More

Build Cooler Master Systems Product