- Sep 2, 2012
- 2
- 0
- 10,510
**BUILD**
Board: ASUS P8H61-M LE/CSM
Brain: Intel Core i5-2500K Sandy Bridge 3.3GHz
Memory
atriot 8gb (PSD38G13332H)
Vcard: GeForce GTX 550 Ti
Problem: I perform a bench test with only 1 stick (4gb) of ram installed and computer post fine. But when I add the 2nd stick of ram computer turns on but doesnt go into Bios or start Windows. I called ASUS customer service and he informed that I may have to up the voltage. When I asked what the preferred setting was he said he didnt know.(didnt know much)
At the moment its set a the stock 1.50 voltage. I tried 1 stick of memory separately in each dimm slot and all work. So I am not sure if its either slots thats messed up.
any ideas?
Board: ASUS P8H61-M LE/CSM
Brain: Intel Core i5-2500K Sandy Bridge 3.3GHz
Memory
atriot 8gb (PSD38G13332H) Vcard: GeForce GTX 550 Ti
Problem: I perform a bench test with only 1 stick (4gb) of ram installed and computer post fine. But when I add the 2nd stick of ram computer turns on but doesnt go into Bios or start Windows. I called ASUS customer service and he informed that I may have to up the voltage. When I asked what the preferred setting was he said he didnt know.(didnt know much)
At the moment its set a the stock 1.50 voltage. I tried 1 stick of memory separately in each dimm slot and all work. So I am not sure if its either slots thats messed up.
any ideas?
Facebook
Twitter
Instagram