Bluetooth sync problem -- help.

Archived from groups: alt.cellular.bluetooth (More info?)

hi,

First apology for bringing an issue not related to cellular as this
problem is sync tungsten T with belking bluetooth adapter.

Set up everything:

1. belking adapter configured to use com 4 & detects PDA with
successful pairing

2. TT set up to detect & pair with belking adapter

Both devices see each other. The problem is when doing a sync over
bluetooth

1. syn initiated (stage 1)
2. after 30 or so seconds TT gives message:

"connection between hand held and desktop could not be established.
Please check your setup & try again".

This is really weird as paring was successful so why doesn't sync
work?

Help,

thanks

Archived from groups: alt.cellular.bluetooth (More info?)

You can follow Tony's advice. Also check that this Bluetooth dongle is not
connected to a USB HUB, but directly to your computer.

--
Mauricio Freitas, Microsoft MVP Mobile Devices
Handhelds, mobile: http://www.geekzone.co.nz
Bluetooth guides: http://www.geekzone.co.nz/content.asp?contentid=449
Performance Centre (Pocket PC reviews):
http://www.geekzone.co.nz/content.asp?ContentId=2028


"Tony Clark" <curiousgeorge1964@hotmail.com> wrote in message
news:vXhgc.14399$A_4.10734@newsread1.news.pas.earthlink.net...
>
> SNIP
>
> > Both devices see each other. The problem is when doing a sync over
> > bluetooth
> >
> > 1. syn initiated (stage 1)
> > 2. after 30 or so seconds TT gives message:
> >
> > "connection between hand held and desktop could not be established.
> > Please check your setup & try again".
> >
> > This is really weird as paring was successful so why doesn't sync
> > work?
> >
> You need to have the T|T configured properly for synching as opposed to
> using BT for say a Network or Cell Phone connection.
>
> I created a new Connection type through Preferences that I called BT to
PC.
> The parameters are
>
> Connect To: PC
> Via: Bluetooth
> Device: <PC device name as discovered by Bluetooth>
>
> This works perfectly for me. So check which connection type you are using,
> it should say so in the Hot Sync app.
>
> Hope this helps
> TC
>
>