Sign in with
Sign up | Sign in
Your question

3-Way SLI on SaberTooth X58

Last response: in Graphics & Displays
Share
a b U Graphics card
July 13, 2011 2:54:26 AM

Is it possible to do 3-Way SLI on my Asus SaberTooth X58 or just 2 way SLI?... Also If I can do 2 Way SLI, What's the bottom or last one for?(PCI-E 2.0)

More about : sli sabertooth x58

a b U Graphics card
July 13, 2011 3:13:16 AM

You can only go sli as the bottom one is a 1 x PCIe x16 (at x4 mode) so it would not be worth going tri sli. If you plan to go sli make sure to have at least a good 750w+ psu.
a b U Graphics card
July 13, 2011 6:13:50 AM

mute20 said:
You can only go sli as the bottom one is a 1 x PCIe x16 (at x4 mode) so it would not be worth going tri sli. If you plan to go sli make sure to have at least a good 750w+ psu.

Im planning to get the Corsair Tx750 V2 and am also ganna buy another GTs 450 and SLI OR i'll probably get a GTx 580(Probably GTx 590 or ganna wait later on for higher-end Graphic Card coming out and probably 2 years from now) and use my GTs 450 for PhysX...
a c 271 U Graphics card
July 13, 2011 5:09:45 PM

I think the board needs to have an NF200 chip to be able to do 3-way SLi.
!