Sign in with
Sign up | Sign in
Your question
Solved

New build,BSOD during the starting logo.

Last response: in Systems
Share
September 18, 2011 11:44:20 PM

Hello,I ordered one of the labor day bundles form new egg and it came in last week. I have been busy with school so I have not had time to put it together till a couple of days ago. I got the system put together now and got my 64bit win 7 cd in the drive and it loads the cd but it goes to a BSOD[see below] when the animated logo begins to pop up. I tried to debugger mode,but it just hangs up in the same spot and does nothing. I pulled a different HDD from one of my other computers and it attempts to go into the OS but BSODs at the same spot. I am very excited about this build,but I really cannot figure out what is going on.

Build:
PSU:RS-460-PSAR-J3, Elite 460W
CPU:AMD Phenom II X6 1055T Thuban 2.8GHz Socket AM3 125W Six-Core Desktop Processor HDT55TFBGRBOX
MB:GIGABYTE GA-880GM-USB3 AM3+/AM3 AMD 880G USB 3.0 HDMI Micro ATX AMD Motherboard
Memory:G.SKILL Value Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBNT
HDD:Seagate Barracuda ST31000524AS 1TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
Graphics card:SAPPHIRE 100291DDR3L Radeon HD 5450 512MB 64-bit DDR3 PCI Express 2.1 x16 HDCP Ready Low Profile Ready Video Card
DVD driveSony Optiarc CD/DVD Burner Black SATA Model AD-7260S-0B - OEM



BSOD error codes
STOP: 0x0000007E (0XFFFFFFFFC0000420, 0XFFFFF880012A37BE, 0XFFFFF880009A8A58, 0XFFFFF880009A8180)

ACPI.sys -ADDRESS FFFFF880012A37BE base at FFFFF8800127EOOO date stamp4CE77USA


Today I updated the bios and it caused no change whatsoever. I am great-full for any help and thank you in advance.

Best solution

September 19, 2011 1:35:39 AM

Either the PSU is crapping under the load or the RAM do not get enough power. Go in BIOS and give a little bit more voltage to the RAM. This would help stabilize things.
Share
Related resources
September 19, 2011 1:56:01 AM

You could also have a faulty memory module, try using one at a time in each dimm slot...

and like Pat said there are many conflicting reviews of your PSU , maybe you should look for a more reputable model. Check the comments on Newegg for your model PSU many unhappy people... but also some very pleased, it just seems too inconsistent for a new build, Check Tom's for PSU reviews...
m
0
l
September 19, 2011 5:13:39 AM

I tried bumping the memory voltage +0.05 and +0.1 and it still failed at the same spot. I tried it with one stick as well and there was no change. I can pick up a new PSU tomorrow to try it out.
m
0
l
September 19, 2011 9:22:39 PM

Best answer selected by mufasa.
m
0
l
September 19, 2011 9:23:51 PM

pat said:
Either the PSU is crapping under the load or the RAM do not get enough power. Go in BIOS and give a little bit more voltage to the RAM. This would help stabilize things.


Thank you very much. I picked up a 600W Corsair PSU at Best Buy and the system has passed the hang up point,it's installing as we speak. thank you very much once again!!!
m
0
l
!