Sign in with
Sign up | Sign in
Your question
Solved

New build will not post

Last response: in Systems
Share
September 21, 2011 3:44:16 PM

I currently have a Dell Inspiron, I have upgraded by the part over the last few months and I am ready to move the parts.

Specs of Dell with Foxconn MB and DDR2 memory
E8500 Core 2 Duo
Antech Green 500 watt
Asus GTX 460
SAMSUNG Spinpoint F3 HD103SJ 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive


I am moved the above to a new Antech case and a new motherboard. I have tried 2 mother boards
Board 1-Foxconn G41MXE-V LGA 775 Intel G41 Micro ATX Intel Motherboard

Board 2-BIOSTAR G41D3G LGA 775 Intel G41 Micro ATX Intel Motherboard

New DDR 3 memory- Team Elite 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10660)

So far neither board will post. Powers up but no beeps and no output to monitor. No power to mouse or keyboard.
I have cleared the bios, everything is connected properly all parts including memory came from working system and continue to work when put back.
Any suggestions?

More about : build post

a b B Homebuilt system
September 21, 2011 4:42:17 PM

have you tried to test the MOBO outside the case with CPU and memory only and use the onboard video card?
m
0
l
September 21, 2011 4:47:32 PM

Emerald said:
have you tried to test the MOBO outside the case with CPU and memory only and use the onboard video card?

I have not tried out of case. Grounding issue? I figured I ruled that out using two different motherboards?
m
0
l
Related resources
a b B Homebuilt system
September 21, 2011 5:09:29 PM

if you only use the MOBO with CPU and connect the PSU, do you have a light come on on the MOBO
m
0
l

Best solution

a b B Homebuilt system
September 21, 2011 5:13:14 PM

This no boot new build tutorial should help.

http://www.tomshardware.com/forum/261145-31-perform-ste...
Share
September 23, 2011 2:54:58 AM

Fixed. PITA though. Got a new MSI motherboard. Did a dry out side of case and it posted. Put everything together but Bluescreened. Had to reinstall windows 7 to get it working. Had to re-install everything. But it is up. Still need to do driver updates on MB. Running a bit slow. thanks for your help
m
0
l
September 23, 2011 4:55:02 PM

Best answer selected by fr8mvr.
m
0
l
!