2600K Temps

[tomga]

Presently have a 4.8 GHz overclock of my 2600K in an Asus P8Z68-V/Gen3 cooled by Noctua NH-D14. CPU core voltage is in offset mode using +.07 offset (worked up to this in .005 increments). CPU-Z shows the core voltage as 1.424 while running P95 blend (1.064 at idle). Real Temp shows cores 1&4 in the high sixties to low seventies and cores 2&3 in the mid to high seventies. Load line calibration is set to ultra high, VRM frequency at 350, phase control on extreme, duty control on extreme, and hyperthreading off. I have read that the default values for VCCSA, CPU PLL, PCH Voltage, and PCH PLL can all be lowered slightly to keep the CPU cooler. Anyone tried reducing the default values for VCCSA, CPU PLL, PCH Voltage, and PCH PLL to help control CPU temps? If so, how much do you lower each value? Any other helpful temperature control suggestions appreciated. Thank you.

 

[sosofm]

A heard a lot of people not to raise the core voltage more than 1.35 . This is almost maximum in the safe zone .