Boot Device Led and VGA Led on ASUS M5A99X EVO

Hey guys, its my first build and everything was all and well until I tried to plug it in and turn it on.

It won't POST at all. It has both the VGA led and the Boot Device led and I'm at a loss. I've been browsing the forum to troubleshoot with no avail.

I cleared the CMOS and still nothing.

Im running a EVGA GTX 480. I tried both the DVI port and HDMI port and still nothing. Any help would be amazing.
3 answers Last reply Best Answer
More about boot device asus m5a99x
  1. Best answer
    Welcome to Tom's Hardware Forums,
    First, check to make sure your graphics card is firmly seated in it's slot (often takes more pressure than you would think).
    Also check to make sure all connections on the motherboard (and optical drives/HDD's are firmly seated.
    If still nothing - here's some reading which may help also
    Good luck
  2. So I found out the graphics card was just powered incorrectly after 2 hours on the phone with ASUS who was convinced it was a hard drive issue and an unnecessary bench test. Thanks for the help :D
  3. Best answer selected by bradshaw55.
Ask a new question

Read More

Motherboards Boot LED Monitor Devices