Two Fans & a Motherboard Help! Tags: Build Silverstone Cases Motherboards Systems Product Last response: September 25, 2011 6:40 PM in Systems Share awkiii September 25, 2011 5:20:21 PM Am working on a build right now. Case is a Silverstone Sugo SG04-F with two built in fans. Motherboard is a MSI 880GM-E41. Both fans have a leads to the motherboard but I can only find one "SYSFAN" connector. Anyone have an idea where the second goes? Appreciate the assist! More about : fans motherboard beenthere a b V Motherboard September 25, 2011 6:08:26 PM Most mobos only have one "systfan" connection. The other fan needs to be hooked direct to the PSU. If the fan has the small 3/4 pin mobo connector then you need an adapter. http://www.newegg.com/Product/Product.aspx?Item=N82E168... m 0 l jReps0l September 25, 2011 6:40:52 PM You should have a 4-pin CPUFAN header just to upper-left of the ram slots. If you still can't find it, reference your the manual that came with your board: Motherboard Layout, Page 1-4. m 0 l Can't find your answer ? Ask ! Publish Read discussions in other Systems categories Homebuilt New Build Prebuilt Cases Power Supplies RAM CyberPower !