[Solved] BIOS/ Windows Problems

[tmsimmons1]

I recently installed a 1.5 GB hard drive and reinstalled windows xp with boot discs. After the installation, I am receiving the followilng message below. When I Press any key to continue my PC will continue logging on to windows XP correctly.

How can I eliminate these messages and boot up windows xp automatically when I turn on my PC with a reponse to Press any key to continue?


A7512ims v3.1 062008
Pentium(R) Dual-Core CPU E5300 @ 2.606Ghz,m Seeed: 200x13 = 2600Mhz
DRAM Frequency for DDR2 300 ( Dulal Channel)

Initializing USB Controllers...Done
Your cas had been opened
Press any key to continue

Thanks

tmorse_simmons1@msn.com

 

[clutchc]

I recently installed a 1.5 GB hard drive and reinstalled windows xp with boot discs. After the installation, I am receiving the followilng message below. When I Press any key to continue my PC will continue logging on to windows XP correctly.

How can I eliminate these messages and boot up windows xp automatically when I turn on my PC with a reponse to Press any key to continue?


A7512ims v3.1 062008
Pentium(R) Dual-Core CPU E5300 @ 2.606Ghz,m Seeed: 200x13 = 2600Mhz
DRAM Frequency for DDR2 300 ( Dulal Channel)

Initializing USB Controllers...Done
Your cas had been opened
Press any key to continue

Thanks

tmorse_simmons1@msn.com

If you meant to say "your case has been opened", that is a message letting you know the BIOS has detected the case is open. The setting to disable the case open warning is in the BIOS setup. You need to press Delete or F1 depending on your system and prowl around the BIOS to see where that offering is. Then disable it. Save and reboot.