Sign in with
Sign up | Sign in
Your question

DDR3 Voltage too high on auto-setting?

Last response: in Memory
Share
November 2, 2012 10:29:22 PM

Hello,

If you take a look at the photo below than you can see the DRAM Voltage is at auto setting 1.585V. The Asrock program reports the same voltage for the ram. However the ram modules are specified to work at 1.5V.
Is this a problem or is it oke? I am quite worried to see this. it is a new pc.
November 2, 2012 10:52:14 PM

snowcake said:
Hello,

If you take a look at the photo below than you can see the DRAM Voltage is at auto setting 1.585V. The Asrock program reports the same voltage for the ram. However the ram modules are specified to work at 1.5V.
Is this a problem or is it oke? I am quite worried to see this. it is a new pc.
http://i.imgur.com/qMfPy.jpg


It's not going to kill your machine if that's what you're worried about. Voltage at 1.65 would easily be safe.

Manually set it to 1.5 and run memtest86+. If it tests good, you're all set.
!