/ Sign-up
Your question

New build, no display on start-up

  • New Build
  • New Build
  • Systems
Last response: in Systems
October 11, 2011 4:52:16 AM

Nothing displayed on monitor when I first power up my new system. This is my first build, the components are listed here:


I'm fairly new to all of this, and I did run through the checklist of troubleshooting tips. I popped out the CMOS battery and put it back in - no luck. Any ideas?

More about : build display start

October 11, 2011 7:28:34 AM

Well if you went through the troubleshooting guide this is roughly the order of things to check next:

Mobo -> PSU -> CPU

So most likely the mobo is DOA, but if you have a 2nd PSU to test with you can try it to see if there is something wrong with the PSU.
Otherwise i would go about getting the mobo replaced.