P4M800Pro-M & DDR2 BIOS Problem ECS

[the german]

Hello, i got a error reporting message reading, consider bios upgrade.

Microsoft`s Reply
During the crash analysis, we noticed the basic input/output system (bios) version on this computer does not match the specs for the cpu that is installed on this computer. This can occur when a newer processor is installed on a older system board or a older bios. Contact motherboard manufacturer for an updated version of bios for computer`s processor.

Thanking you very much for the assistance.

Franz Heidler.

 

[o1die]

Here's a cpu support list: http://www.ecsusa.com/ECSWebSite/Product/Product_Detail.aspx?DetailID=673&CategoryID=1&DetailName=Feature&MenuID=16&LanID=9. If your cpu isn't on the list, then your board won't run it.

 

[ky_ecsusa]

Please check the following link for the BIOS udpate for the motherboard version 2.0:

http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=673&CategoryID=1&DetailName=Feature&MenuID=16&LanID=9

You can check the following link for the flashing BIOS instruction:

http://www.ecs.com.tw/extra/flashutl/DOS%20Flash%20Utility%20User%20Guide.pdf