Sign in with
Sign up | Sign in
Your question

PowerColor HD 6850 no signal

  • PowerColor
  • HD
  • Monitors
  • Graphics
Last response: in Graphics & Displays
August 24, 2011 10:45:42 AM

Hi I have just finished a new build which is working fine apart from the powercolor scs3 HD 6850. Whenever I plug it in my monitor reads no signal but the system still turns on. I can hear that windows is working as usual. When I take out the card then the whole system runs fine on the MB's onboard graphics. I have updated 6850's drivers as well as dell monitor's, MB's and everything else I can think of. Any suggestions how to get it working?

Intel i7 2600k
Asus P8Z68-V PRO
PowerColor HD 6850 SCS3 1GB
Corsair 120GB SSD
Antec CP-850 PSU
Dell U2412M monitor

More about : powercolor 6850 signal

August 29, 2011 3:09:32 AM

What interface do you use?
August 29, 2011 3:20:46 AM

If you are using DVI dongle of your PowerColor HD 6850 SCS3 , make sure your monitor's output is set to analog but if you are using native DVI, set it to digital.