AX750 cpu not going into mobo

[grandpatzer]

so the left cable does not click into motherboard regardless how much force I use.

it is 2-5mm from going inside it, something to worry about?

you can click on picture for bigger picture

 

[vrumor]

FOrcing anything into any motherboard slot is never a good idea. If it doesnt fit, you dont have the right plug. You are most likely using a 8 pin connect that was meant for a GPU maybe? There must be another 8 pin, most likely a 2x4 pin that can be put together.

 

[grandpatzer]

FOrcing anything into any motherboard slot is never a good idea. If it doesnt fit, you dont have the right plug. You are most likely using a 8 pin connect that was meant for a GPU maybe? There must be another 8 pin, most likely a 2x4 pin that can be put together.

well this is 2x4 cable?

I can't figure out any other cable besides this on AX750

 

[totalknowledge]

It only goes in one direction... if it doesn't fit flip it around and try it the other way.

 

[grandpatzer]

It only goes in one direction... if it doesn't fit flip it around and try it the other way.

yes it fits perfectly fine, it just doesn't make that "click" also 2-4mm not completely in.

I'm not going to flip it beacause it is not going in any other direction.