Sign in with
Sign up | Sign in
Your question

Slow USB 3.0 on Gigabyte GA-H77-DS3H. Sloves after restart.

  • Chipsets
  • Gigabyte
  • USB3
  • Windows 8
  • Motherboards
Last response: in Motherboards
December 6, 2012 3:28:43 AM

Motherboard: Gigabyte GA-H77-DS3H
Ram: 8GB Kingston HyperX
CPU: i5-3570k
HDD: WD Caviar Black 2TB Sata 6GB/s
External HDD: Seagate Goflex 1.5TB USB 3.0
O.S: Windows 8 Enterprise 64Bit

I recently upgraded to Gigabyte GA-H77-DS3H. It has native support for USB 3.0 on Intel H77 chipset. The problem is whenever I connect my Goflex 1.5TB on USB 3.0 port, it gives only speed of USB 2.0 at 27-29MB/s. But after a restart it gives USB 3.0 speed of 80-90MB/s. Now everytime I connect it I have to restart to get USB 3.0 speeds.

I am not new to USB 3.0, earilier I had a GA-X58-UD3R board with NEC USB 3.0, it didn't had this problem, it gave good speed every-time I connect.

Is this the problem with intel chipset or windows 8? Since windows 8 has native support for USB 3.0 there was no driver to install. Still I found Intel USB 3.0 driver for windows 8 and installed it, but still no use.

More about : slow usb gigabyte h77 ds3h sloves restart

January 26, 2013 5:00:27 PM

mabey the hdd is a usb 2.0 device?
January 26, 2013 5:01:30 PM

wait, u have the Gigabyte GA-H77-DS3H? does it have a usb 2.0 header on it? plz tell me i wanna use that board with a usb 2.0 case
January 26, 2013 10:23:23 PM

My HDD is Sata 3.

Mobo has both usb 2.0 and 3.0