if you have experience soldering wires you can connect two of the case fans..lets say two rear exhaust fans to connect to a single 4 pin that goes into mobo's header
im using a g.1 sniper 3 it only has 5 i need 6 chassis fan connectors
because i need one pump and 5 fans running
pls help
i normally use molex to 4 pin chassis adapters for this but i can't get because im on a different country for a while
what i actually did on my fan controller was plug it in normally then with the other fan remove the pins from the adapter of the fan/pump u want to connect and hook it into the back of the where that fan is connected. its the easiest way without cutting it.