3-monitor setup

[pdxoutdoors]

Wondering what additional adapters, etc, I'll need to make 3 of these:

HP w2207h -- (VGA / HDMI)

Work for Eyefinity on that card (SAPPHIRE FleX 100312FLEX Radeon HD 6950 2GB 256-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card with Eyefinity.) --
1 x HDMI DisplayPort
2 x Mini DisplayPort DVI
2 x DVI (1 Single Link, 1 Dual Link)

 

[eyefinity]

I'm not 100% sure about this but it looks like it should work -

One will go direct hdmi - hdmi http://www.newegg.com/Product/Product.aspx?Item=N82E16882270048

and you'll need a small dvi - dsub (vga) connector to connect the vga cable from the monitor to the dvi on the card (assuming it is vga on both ends).

http://www.newegg.com/Product/Product.aspx?Item=N82E16814998101

If you don't have any cable for the monitor then 1 of these (DVI to HDMI) will do - http://www.newegg.com/Product/Product.aspx?Item=N82E16882021059


edit - changed a bit.

 

[jasonw223]

All you'll need is:

1 DVI cable
1 DVI-HDMI cable (or DVI cable with DVI-HDMI adaptor)
1 HDMI cable

Done!

You don't need to touch the mini displayports with that card.

 

[eyefinity]

All you'll need is:

1 DVI cable
1 DVI-HDMI cable (or DVI cable with DVI-HDMI adaptor)
1 HDMI cable

Done!

You don't need to touch the mini displayports with that card.

Hm yes you are almost correct, but he needs 2 DVI - HDMI cables instead of 1?

So 1 HDMI - HDMI and 2 DVI - HDMI (1 is supplied with the card so he'll need 1 more). It depends on what cables he has for the monitors right now, whether those small adaptors will do or whether he needs to buy cables.

 

[jasonw223]

Woops yeah haha.

2 DVI-HDMI
1 HDMI

 

[pdxoutdoors]

Best answer selected by PDXOutdoors.